Alumina single board performance and application
[China Aluminum Industry Network] The aluminum veneer process is different from the ordinary varnish process in that it electrolyzes the conductive acidic electrolyte through the current, oxidizes the surface of the aluminum metal that constitutes the anode, and naturally grows a thick and dense layer on the aluminum surface. Alumina protective film, this oxide film is not an additional layer and will not peel off. The oxide film is transparent and colorless, and the microcrystalline structure is hexagonal honeycomb. The aluminum color can be used to highlight the strong metal sensation, and evenly colored in the micropores can give beautiful color to the curtain wall, which greatly widens the application horizon. Performance: The standard thickness oxide film (3um) of alumina single-plate aluminum veneer does not change color in the room for a long time, does not corrode, does not oxidize, does not rust. Anodized aluminum veneers with a thicker oxide film (10um) can be used outdoors and can be exposed to sunlight for long periods of time without discoloration. Strong sense of metal: The anodized aluminum veneer has a high surface hardness, gem grade, good scratch resistance, no surface paint coverage, retains the metallic color of the aluminum plate, highlights the modern metal feel, and improves the product grade and added value. High fire resistance: pure metal products, no paint and any chemical substances on the surface of the anodized aluminum veneers, 600 degrees high temperature does not burn, no toxic gases are produced, and it meets the fire protection and environmental protection requirements. Strong stain resistance: easy to clean, simple to maintain, no fingerprints, easy to clean, no corrosion spots. Good processability: The positive grade aluminum oxide veneers are highly decorative and moderate in hardness. They can be easily bent and shaped, and can be continuously and rapidly stamped to facilitate direct processing into products without the need for complicated surface treatments. This will significantly reduce the production cycle time and Reduce product production costs. Application: Anodized plate is suitable for metal aluminum ceilings, curtain wall panels, aluminum-plastic panels, fire prevention panels, honeycomb aluminum panels, aluminum panels, electrical panels, cabinet panels, furniture panels and so on. Expanded metal is sometimes considered an alternative to sheet metal or wire mesh. It combines some of the best features of both-providing a material that is stronger than thin wire mesh and has better air flow and drainage than sheet metal. Expanded Metal Mesh,Element Expanded Metal Mesh,Aluminum Expanded Metal Mesh,Ss Standard Expanded Metal Mesh HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com