Analysis of particle source of automobile painting spray line
Most of the domestic coating lines use electrostatic spraying, the coating utilization rate is basically controlled at 60%~80%, and a lot of paint mist is easily generated during the painting process. Most of them will form paint residue, and some will float in the air, and some will absorb. On the surface of the automatic spraying equipment and painting booth, or scattered on the surface of the painter's clothes hat, gloves, etc., eventually gather to form particles and pollute the body. Such particles will especially contaminate the sprayed wet film, forming particles that are difficult to handle, accounting for particles. More than 40% of the total amount is formed. Effective measures: (1) Set circulating water under the spray booth, and use the circulating wind to bring the paint mist to the water for treatment. (2) Lay on the wall with anti-static plastic paper, and apply Vaseline glue, and replace it once a week. (3) Automatic machine rotating cup, the part of the atomizer will accumulate under the action of static electricity for a long time, and will form paint slag on the surface, so it will be cleaned 2 times/shift and cleaned with special clean cloth. More silk.
The main product related to abrasives is the abrasive belt cleaning block
Main features
1. For maximum protection in
any shop
2. Removes accumulated particles
3. Increases the lifetime of
sanding belts and discs up to 500%
Our abrasive cleaner sticks are
the easiest solution for cleaning/unloading abrasives. Increase the life of new
sanding belts and discs up to 10 times as long with our quality abrasive belt
cleaners. Simply press the cleaner stick lightly against moving sanding belts
and discs to remove clogged-up pitch and saw dust. Improves the finish quality
and prevents burns and marking. Cuts down the frequency and costs of belt
replacement.
Remove gum buildup on your
sanding discs and belt sanders with this amazing Sanding Belt cleaner. The
sanding belt cleaner instantly cleans sanding belts of all grits and removes
the accumulated particles that lodge between the abrasive grains and cause a
dull cut. Increase the life of sanding belts and discs up to 500% with this sanding
belt cleaner
We distributes and wholesales various brands of Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , Abrasive Machine and Surface Conditioning Product etc, and enjoy a high position among consumers.
Product Description
This crepe-rubber belt cleaner
quickly removes gum and grit from belts and discs without damage. Just press
the cleaning block against your sanding belt or disc until it is clean. That is
all there is to it. Extend the life of your belts or discs with this innovative
natural cleaner.
Clean sanding belts and discs
for optimal performance
Abrasive belt & disc
cleaner removes residue to unclog loaded sanding belts or discs. The
easy-to-use cleaner comes in handy on the job site or at home for anyone from
professionals to do-it--yourself, and using the cleaner will extend the life of
the sandpaper and orbital machine or belt sander - whichever you use. Run the
abrasive cleaning stick across the belt or disc to remove unwanted gunk and
make a smooth surface for optimal performance.
Expand the life of your belt
sander, orbital machine and sandpaper with the Abrasive belt & disc
cleaner. It removes residue to keep it from clogging sanding belts and discs.
1. remove residue on sanding
belts and discs with Abrasive belt & disc cleaner
2. abrasive cleaning stick
From the Manufacturer
The abrasive belt & disc
cleaner is for all-purpose, wet or dry sanding. The flexible rubber
construction works better.
Rubber Cleaning Block,sanding disc rubber cleanning,Abrasive Cleaning Block,Abrasive Paper,Abrasive Related Products Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.abrasive-jd.com
