Analysis of the advantages of ceramic inserts in hard milling of molds

Keywords:

In order to maintain a competitive edge in today's global economy, moldmakers must continue to produce high quality products in a very short period of time. In order to achieve this goal, advanced manufacturing process technology and cutting tool materials must be developed, so that the mold processing workshop can always be in a competitive position. As one of these advanced manufacturing technologies, hard milling is constantly evolving. In the past few years, due to the limitations of the machine tools and cutting tools at the time, mold manufacturers failed to really use the hard milling process. Today, however, most modern machining centers equipped with high-rigidity, high-speed spindle systems and advanced processors are good at cutting hard materials. At the same time, the advanced CAM software package has a specific machining cycle for hard milling, and a tool path (knife path) function that optimizes tool life is designed.

Hard milling tool selection

Three types of milling tools are commonly used in mold shops: solid carbide end mills, indexable carbide inserts, and newly developed indexable ceramic inserts. These three tools each have their own advantages and disadvantages in different machining applications.

(1) Solid carbide end mills usually require precision grinding and coating treatment, which are quite expensive. When the tool becomes dull, it must be reground and recoated. However, the re-repaired end mills often have lower cutting performance than new ones.

(2) The second type of hard milling tool is equipped with an indexable carbide insert. In most cases, the carbide grades and insert geometry of such inserts are not designed for hard milling, so they do not provide optimum tool life and productivity when machining hardened materials.

(3) The third type of hard milling cutters use indexable ceramic inserts, especially whisker-reinforced ceramic inserts. The use of a tooling system with indexable ceramic inserts offers many benefits, including reduced cycle times and reduced machining steps per workpiece. However, the use of such a tooling system requires both the programmer and the operator to rethink the machining process and should pay attention to details that may not be considered when using other tools.

The mold shop uses a complete range of hard milling tools with whisker-reinforced ceramic inserts (including indexable inserts for milling surfaces, cavities and contours) to roughen hardened blanks into one part and in one installation Finishing is completed. Milling cutters with ceramic inserts (from large face milling cutters to small diameter end mills with indexable ceramic inserts) enable safe high-speed milling. When using high-speed cutting with a ceramic insert milling cutter designed for hard milling, it is important to ensure the safety of the blade clamping.

High-speed milling cutters are developed based on the safety and reproducibility of ceramic insert milling speeds. The whisker-reinforced ceramics currently used have a melting point in excess of 2000 ° C, which means that the ceramic insert can be processed at a cutting speed that is much higher than the failure point of the cemented carbide insert. In fact, whisker-reinforced ceramic inserts work well at temperatures above the melting point of cemented carbide inserts. Cooling fluids are not recommended for hard milling with ceramic inserts, but air cooling is recommended, especially in pocket milling to avoid secondary cutting of the chips. Reducing the use of coolant and waste disposal costs is also an added benefit of using ceramic inserts for hard milling.

Use ceramic blades to reduce processing costs

Hard milling with ceramic inserts can help mold shops reduce production costs in a number of ways. First, you can replace multiple processes with one operation. When hard milling with a ceramic insert, the steel can be quenched and then the workpiece can be milled in a hardened state, replacing the three processes of machining, quenching and reworking. By reducing the time required to install and transport workpieces at different stages of processing, cycle times and improved working paths can be reduced. In addition, rough milling of hardened workpieces with ceramic inserts avoids expensive and time-consuming EDM (Electrical Discharge Machine) machining without the need to make one or more electrodes.

Elevator Control Modernization

Elevator Control Modernization, Elevator Controller Modernization, Elevator Control System Modernization, Elevator Complete Control System Modernization

REASONS TO MODERNIZE YOUR ELEVATOR CONTROLS:

  • You are experiencing higher repair costs related to controls
  • Inefficient, poor reliability and operation
  • Public safety considerations
  • Long customer/tenant wait times
  • Increased shutdowns and entrapments
  • Landing and leveling problems
  • Poor ride quality
  • Decrease energy costs
  • Serviceability/Proprietary Controls
  • Obsolescence


CEP Elevator Products specializes in custom elevator control modernization, ranging from simple updating of controls, cab and hall fixtures, to extensive replacement of all your existing elevator equipment. Elevator modernizations keep older buildings competitive with newer buildings, and typically provide a good financial return on your building as well as improving your elevators safety, reliability and performance. Depending on the age and condition of your elevator equipment, the extent of the modernization may vary. We can provide you with a free survey of your current equipment, and provide detailed information regarding the range of options for your upgrade. In addition to increasing the reliability and performance of your elevator, We will bring your elevator equipment up to current codes.

We only uses the best available equipment when performing modernizations. All modernizations begin with non-proprietary control systems and equipment which will enable you to use any qualified elevator service company of your choice to maintain your equipment in the future. Many large, international companies will only install their own proprietary controls and equipment which make it virtually impossible for building owners to change service companies down the road, regardless of the quality of service. This not only locks the building owner to one service company for the life of the equipment, it can also be costly in higher repair and maintenance costs.

After performing modernizations for over two decades, We have the experience and expertise to select the best individual components for your elevator. Many companies try to save money by cutting corners and using lower quality components; however we believe that the slightly higher price of the best components is well worth the cost to ensure that you not only get the look you expect, but also the performance and reliability for many years to come.



Elevator Control Modernization, Elevator Controller Modernization, Elevator Control System Modernization, Elevator Complete Control System Modernization

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjelevatorcontrolsystem.com