Calcium silicate board storage and transportation matters needing attention

· Do not collide during loading and unloading. The bottom of the vehicle must be flat. After loading, fixed measures should be taken to ensure that there is no displacement on the way.

• When lifting or forking, the entire sheet must be stacked neatly to prevent the steel cord or forklift shovel from hitting the edge of the board.

· Care must be taken when loading and unloading one by one to prevent debris from being caught between the plates. If it is not cleaned in time, the plate may be fractured or deformed.

· When transporting the board, it should be carried on both sides of the double-handed board. It is strictly prohibited to carry it horizontally.

• Plates should be stacked on a flat surface or placed on the bottom with a special wooden bracket. A small amount of the plate should not stand upright against the wall.

· The board should be stored in the indoor warehouse, if it is stored in the open air and covered with crepe.

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com