Do not let hidden works become hidden projects

To mention the renovation, people often pay attention to the "face engineering" such as the spatial pattern and design style, and neglect the "lid engineering" of the decoration - the concealment project. In fact, the quality of hidden projects directly affects people's daily lives. The ceiling of the bathroom is always dripping. Well-lit electric lights are always off. The ground leaks and the bursting of the water pipes will always cause the “sweeping waters” and even the neighbors. These problems are almost always hidden in the works. In recent years, in the complaint about the quality of decoration, disputes caused by covert projects accounted for a large proportion. Therefore, a number of senior decoration experts were interviewed in particular to analyze in depth the concealed works in the home improvement and put forward the places that need special attention in the hidden works.

Where is the hidden project

In home improvement, hidden projects mainly include the laying of water and electricity pipes, floor bases, baseboards for protecting walls, base layers for doors and windows, and ceilings. Due to the special concealment of the hidden project, it is easy to cut corners in the decoration and it is not visible on the surface. According to reports, the problem with hidden projects is mainly due to the irregular construction of the decoration team and the omission of some seemingly insignificant and actually very important steps. Many consumers do not have the time to look at the scene, or although they are on the spot but do not know anything about it, they cannot find the problem.

>>> Links: Waterproof: waterproof knowledge of roof garden

Keywords: Waterproof

Waterproof projects are the top priority of hidden projects. They not only exist in kitchens, bathrooms, roofs, balconies, external walls, etc., but also cause oily smoke in households to cause mildew to occur in damp areas. Wooden components such as wooden flooring are exposed to moisture for a long time. Under conditions that lead to rot and deformation, etc., make the family waterproofing an inevitable need for normal family life.

The selection of waterproof products must have the following characteristics: First, environmental protection, due to the small family space, thermal insulation requirements to make home sealing performance is good, so non-toxic, environmental protection is the first requirement of the current home decoration selection; second is multi-functional, At present, the general waterproof material in the market has different advantages and disadvantages of the waterproof principle. Some waterproof materials (such as water repellents) penetrate the concrete surface to form a coating film to prevent the water from passing through. The modern family waterproof material should also have the above different functions. It can penetrate the cement base layer and form a coating film to cut off moisture. Waterproof, anti-mildew, anti-corrosion and other uses. The “neighborhood” family II silicone rubber advanced waterproof and anti-corrosion sealing coating is research and improvement based on the original engineering PSQ coating. Its main components are nontoxic and harmless silicone rubber and silica sol. The product has high elasticity, High-strength, cold construction, single component, simple construction, safety in production and construction, no pollution, etc., are the only new generation products that have used anti-corrosion technology in water-proof materials so far, and can not only be used for waterproofing, but also moisture-proof, Anti-mildew, anti-corrosion function, and, according to the requirements of the owners, free to do the second home waterproof design, full investigation of different regions, different floors, different decoration requirements and other customers of different practical circumstances, to submit a scientific and reasonable family waterproof secondary design To solve the difficulties caused by lack of professional knowledge.

>>>Links: Specifications for Strong and Weak Cables

Keywords: Circuit reconstruction

Electrical wiring is spread throughout the room and safety is especially important. A good circuit modification program should not only pay attention to the use of actual functions, but also take into account safety factors and the convenience of future maintenance. In the actual construction, we must also calculate the circuit capacity, design the circuit reasonably, and match the corresponding wire diameter. For example, if the kitchen and bathroom design the circuit separately, the air-conditioning line should use more than 4 square wires, and at the same time deal with the interference between strong and weak electricity. . From the perspective of safety and maintenance, the power cord should also be protected by a PVC pipe, and elbows should be used at the joints. If the live line can be handled better. When laying the circuit, the wires must be color-separated and need to be threaded. Do not bury the wires directly on the ground or wall. This will leave security risks. After the circuit is laid, the length of the stay line in each box shall not exceed 20 cm, and the length of the lamp head line shall be determined according to the height of the ceiling, generally exceeding 10 cm of the ceiling.

When the circuit is reformed and checked, it is first necessary to ensure that the circuit is powered. Second, you can use the electric pen to check the socket order. It must be the left zero line, the right fire line, and the upper line. Also use the electric pen to check the switch wire sequence. The switch must control the fire wire. At the same time, use the insulation resistance meter to check the insulation resistance value of each circuit is not less than 0.5 megohm. After passing the acceptance inspection, it is necessary to pay attention to the preservation of the circuit construction drawings. Photographs of real scenes should be taken when conditions permit, because drawings and pictures are important technical references for later maintenance.

Keywords: suspended ceiling engineering

As an emerging industry that has developed in recent years, integrated ceilings are not yet mature in market operations and have not yet formed uniform and standardized product and construction standards. At the same time, the public knows little about integrated ceilings, and the hidden works for integrated ceilings are rarely noticed and buried great safety hazards. The integrated ceiling concealment project is chiefly a keel. Many small workshop-type ceiling installations are still fixed with wood, not to mention moisture, fire, and easy to deform. Some integrated ceiling brands are cobbled together with light steel keels without quality certification. They are easily deformed without rust treatment or electroplating treatment. They will rust and break after a long time. Good brands such as Osbourne and others use self-produced double-sided galvanized light steel keels, which have strong bearing capacity and are not easily deformed and durable. Secondly, in the case of motors, conventional ceiling brands mostly use bent and formed motor housings, which have gaps and are easily deformed. Ou Sibao uses metal sheet stretching technology to form a shape and apply insulation on the surface of the housing. The paint shall be closed to prevent the risk of rust leakage.

Hidden Projects Decoration Design Home Decoration Switch Decoration Picture Space Kitchen Decoration Picture Decoration Partition Decoration Style Partitioned Door Kitchen Integrated Ceiling Kitchen Bathroom Ceiling Bathroom Door Bathroom Ceiling Material Bathroom Door Picture Toilet Waterproof Material Toilet Partition Toilet Ceiling Bathroom Design Toilet Waterproof Bathroom Picture Home Decoration Home Home Picture Decoration Home

Track Linear Light

We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting

Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.

While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.

Track Linear Light,Led Linear Light Fixture,Led Linear Lighting,Led Linear Light Bar Fixture

Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlighting.com