Don't call cold floor heating in the cold.

In the winter, heating equipment has become a hot issue. Heating and floor heating are the two giants in the heating market, and the market is increasingly fierce. Some people like to use heating. They feel that while warming, they can heat the milk on the radiators. They like to use the floor heating. Some people like to use floor heating and think that the heating is even and saves space. Xiao Bian here will be a comparison of heating and floor heating, to see which one is your heart is good, together to understand it.

First, heating

Heating, in a narrow sense, refers to a central heating facility. It transports the steam or hot water produced by the boiler to the radiator (ie, the radiator) in the room or vehicle body through pipes (ie, heating pipes), dissipates heat, increases the room temperature, and then returns to the boiler for reheating and circulation. The water used for heating must be clean water to facilitate human health and the environment.

China's Qinling-Northern city of the Huaihe River has a city-wide network of heating pipes. It is operated by government or government-designated companies. It provides centralized heating services in winter, with service levels, charging standards, and start and end dates for heating. different. Cities in the south of the Qinling-Huaihe River generally do not have city-wide heating networks, but there are heating networks on smaller scales (such as residential areas, campuses, and factories).

The benefits of centralized heating are obvious, the heating effect is good, the resource utilization is high, and the average cost is low. However, tenants do not have the right to choose, nor can they adjust the temperature; high-rise households have relatively poor heating results and the same charges; some households owe arrears, but heating is used as usual, which is unfair. In response to this, individual districts have begun to transform the pipe network facilities into a valve for each household, and refuse to provide heating for arrears of households.

Second, floor heating

Geothermal radiant heating, referred to as floor heating, is a type of heating method in which hot water or heating cables whose temperature is not higher than 60 degrees Celsius are buried underground in a coil system under a geothermal floor to heat the entire floor and uniformly radiate heat to the interior through the ground. . Compared with traditional heating methods, geothermal radiant heating has many characteristics such as comfort, energy saving and environmental protection. Generally divided into two major categories of warm water and electric floor heating.

The floor heating is decided by the consumers themselves and is not affected by central heating or the area. Individual residences, public buildings, etc. can be used. In foreign countries, this technology is not only widely used in public buildings and hospitals, shopping malls, office buildings, gymnasiums, swimming pools, and other public buildings, but also widely used in the insulation of building systems such as flower beds, factories, football fields, hangars, and vegetable greenhouses. It is even applied to the insulation of outdoor roads, roofs, stairs, airport runways and various industrial pipelines.

The ground warm temperature is even, it is not easy to cause convection of dirty air, saves space and is energy-efficient, thermal stability is good, operation cost is low, service life is synchronized with the building, and the equipment is not affected by outdoor temperature. But it will occupy the ground floor, because it is a hidden project, maintenance is more difficult; the use of the toilet is limited; floor heating system runs 2-4 years later, the pipeline will produce scale, need to use professional equipment for cleaning.

Warm brand to warm radiator ten brands

Cuplock Scaffolding

Cuplock Scaffolding

Cup-lock scaffolding is basically composed of Standards for vertical and ledgers for horizontal. While standards available in 9 regular sizes with cup joints welded at 0.5m intervals. The bottom cups are formed from high quality steel while the mobile top cups are malleable casting to provide the necessary hardiness on-site

Here comes our 5 types of Scaffolding systems:

- Cup lock Scaffolding(C-Lock Scaffolding)

- Ring lock Scaffolding

-Kwistage Scaffolding

-H-frame Scaffolding

-ID15 Scaffolding Tower, this type Scaffolding is the most widely used in construction, such like bridge.

-Whole Aluminum Scaffolding

Cuplock Scaffolding,Cuplock Scaffolding Assembly,Cuplock Scaffolding Accessories,Cuplock Scaffolding Bangalore

HENGSHUI PIONEER IMP & EXP TRADING CO ., LTD , https://www.hspioneer.com