High-grade paint is not necessarily a putty

When people do home renovations, they often think of high-grade paints. In fact, high-grade coatings do not necessarily reach high-grade coatings, while high-grade coatings only have a minor impact on high-grade coatings. In addition to coatings, what influences coating effects are more important than coatings? That is the coating of the base material - "putty."

There is an old saying in the painting industry: “Three sides, seven ends.” Means that the role of surface materials only accounts for 30% of the quality, while the role of the grass-roots materials accounted for 70%. In general, the role of grass-roots materials is mainly strong, smooth and smooth. On this basis, the role played by the surface layer material is mainly “coloring”, that is, imparting surface color and playing a role in beautifying and decorating.

If the grass-roots level is very good, even if the surface layer is made of mid-range materials, it will be similar to high-grade painting. On the contrary, if the grass-roots level is poor, even if the surface layer is high-grade material, only middle and low-grade paintings can be made. Therefore, when decorating homes, it is more important to choose high-quality putty besides choosing the finish. What kind of putty can be considered as high quality putty?

First, firmly bonded

At present, most of the decoration companies are still using the original method to prepare putty. The putty that is prepared by this method is prone to inaccurate proportions, inaccurate measurements, poor adhesion, and is prone to flaking and shedding.

Second, smooth and delicate

In general, the coating formed after the film is formed has a thickness of only a few tens of wires, and the smoothness of the putty layer directly determines the smoothness of the coating surface.

Third, good water resistance

Water resistance is often an important factor in determining the quality of putty. Good water resistance putty not only has good adhesion under moldy and damp conditions, but also has a great help in the film formation on the surface of the paint.

Coating precautions

Base surface treatment:

1. New wall: Make sure that all dust foreign matter is brushed or scraped off. It is also necessary to ensure that the walls are free of saline, greasy materials and ridges. Cover all adjacent walls during construction to avoid being sprayed. All cracks and flaking should be caulked and leveled. Before the official application, it is recommended to seal it with anti-mite primer.

2. Old wall: This product is applied to the old wall and it must be ensured that the wall base is firm. When applying the first coat, first wash the wall with a soda solution, brush it, and apply it after drying.

Note: For more complex foundation construction, in order to ensure the best results, it is best to coordinate with the coating supplier and design the corresponding construction plan according to the actual situation.

Construction method: When spraying is completed by the spray gun and the compressor, it is ensured that the coating is not covered in advance. Roller coating consists of decorative roller series to complete various texture patterns. The product can be applied to the wall with a steel trowel, and the final pattern effect can be achieved with a soaked glossy plastic roller or a plastic trowel.

Construction Environment: The suitable construction temperature is 5-40 degrees Celsius, and the humidity requirement is 90% or less. When sprayed, the wind speed should be less than 6m/s, and the air compressor should be supplied with more than 6kg.

Product features: Use knife, roller or spray gun tool to smooth or texture effect products. Rich in texture, long-lasting, color-preserving finish.

Wall construction paint decoration paint home decoration home decoration look decoration company

LED Tube Light

LEDER technology`s LED grows tube is the perfect lighting solution. Our tube light fits any standard fluorescent lighting fixture, allowing for easy conversion of a standard light into a grow light. LED tube light is energy efficient, operating at only 18W and has low heat output keeping your plants cool. Our LED tube light emits full-spectrum light, simulating natural light and helping your plants grow faster.

This clear LED tube lights offer high efficiency without the large power consumption. Instant energy savings: No longer worry about the cost of your electricity bill or how often you will need to buy new lights for your home or workspace.

Features:

• Long service life

• Adopt wide voltage, constant current current

• Quality assurance

• Power box fixed, stable performance

• Stable voltage, energy saving and environmental protection

• Color temperature :3000k-6000K

• Variety of styles, seamless connection

• Type of protection: IP20 /IP65 (Some models)

• Warranty:3 - 5 years

The standard 4-foot fluorescent tube only offers a 13,000 hour lifetime, which makes our strip LED light tubes more than 3x longer lasting. This LED tube light is easy to install.We have rich production experience in lighting. Except LED Tube Light, we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light, Track Light , Linear Light , LED Strip Light ,LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .

LED Fluorescent Light,LED Fluorescent Tube,LED Fluorescent Replacement,LED Tube Light Fixture

JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.ledpaintlight.com