How often does the hollow wall tile come off the wall?

Home wall tiles if not posted will also affect the overall effect, so say it is relatively high for the sticky requirements, must be good master craftsmanship Caixing, only to paste to create a comfortable and perfect Living Space. The following Xiao Bian will introduce to you about how long the hollowing out of the wall tiles and the tiling of the wall tiles are introduced.

How often does the wall tile hollow?

How long does it take for a wall tile hollow to fall off? First, you can knock it down to see if the stick is loose . There are generally two phenomena in the hollowing of a tile. In one case, the cement is used in the original brick and the wall. The connection layer is separated and this can be removed by simply holding the tiles. In the second case, the connection between brick and cement is relatively strong, and this hollow phenomenon occurs in cement and the wall itself. For example, if there is a large empty area in the entire wall, it may cause injury, and this situation is recommended for immediate replacement. But to remove the entire wall tile and redo the base, so this situation is generally recommended that you ask a professional to do better.

Wall Tiles 4 Misunderstandings

Tile Paving Misunderstanding 1: Use large-size tiles for wall covering

Nowadays, the specifications of ceramic tiles are getting bigger and bigger. I believe we all know that the use of such large-size ceramic tiles will have better overall results, and it will also look more atmospheric, and the larger the tile size, the seams that come out of the tile will be There will be less. But when you want to know, the small room is not suitable for the selection of such large-size tiles, which will not only cause waste, but also will not be beautifully displayed.

Tile Paving Misunderstanding 2: The Seamless Bricks Keep Smaller The More Beautiful

Jointless small seamless tiles, I believe we all want their own small gaps, that the smaller the gap, the better the overall effect, in fact, if the gap is too small when paving, this will also affect your ability to adapt to the environment change . Due to the change in temperature, it is easy to squeeze the tiles and reduce the normal service life of the tiles. Therefore, the seamless brick is equal to completely seamless, so be sure to leave him a suitable seam. The size of seamless seams should generally be around 1-1.5mm, not less than 1mm; special effects can also widen the gap to 5mm.

Tile Paving Mistakes 3: Ignoring Product Performance

In the construction process, it is easy for people to make a misunderstanding to ignore the performance of the product and not use the paving according to the regulations. What often happens is to save the glazed wall tiles on the ground. In fact, this is also wrong. Make sure that the physics and chemistry of the tiles, such as the water absorption rate of the tiles and the water absorption rate of the tiles, will be much different. Wall tiles High, low floor tiles, their flexural strength is also relatively large.

Tile Paving Mistake 4: Use Common Floor Tiles as Wall Tiles

During the construction process, do not use and tile the tiles as required. Instead of saving, you will put glazed wall tiles on the ground, so you have to know that it will also affect the use of the effect. At the same time, you have to find out that ordinary glazed floor tiles can't be used as wall tiles. External wall bricks can be used as inner wall tiles, but you should pay attention to the fact that inner wall tiles must not be used as exterior wall tiles.

Summarize: How often does the wall tile hollowing fall off and the tiling of the wall? 4 major misunderstandings. Introduce relevant content to introduce to this, in fact wall tile sticks a law is still more important, if does not paste well, fall off phenomenon easily, when must fill I am not in a hurry. I hope that the above introduction will help you.

Palisade fencing, as effective security fencing, is the widest used type in the UK. The forbidding appearance, inherent strength and high damage resistance make the palisade fencing one of the best choices of premise protection.
Designed with smooth surface, rigidity structure, sharp prongs and narrow pale spacing, the palisade fences are normally considered to be difficult even impossible to climb, straddle, grab and gain foot-hold. Thereby, it effective deters would to be intruders and trespassers, protects your assets, office and factory from damages.

Palisade pales are available in D section, W section and angle steel types. All the pales are bolts to two horizontal palisade rails as standards. Once the fence height is over 3 meters, one more palisade rail is needed to maintain the integrity for high security.

Palisade Fence

Palisade Fence,Euro Fence,Palisade Fence Panel,Steel Palisade Fence Designs

Anping County Kairong Wire Mesh Products Co., Ltd. , https://www.krmeshfence.com