How should the scraper reducer be lubricated and maintained?
How should the scraper reducer be lubricated and maintained? How should the scraper reducer be lubricated and maintained: Jinwu Glass Fiber Co., Ltd , https://www.jwglassfiber.com
Install the recommended model and value grease in the gear unit before putting it into operation. The reducer is lubricated with lubricating oil. For vertically mounted gearboxes, additional lubrication measures are used, as the lubricant may not guarantee reliable lubrication of the uppermost bearing.
Before running, inject a proper amount of lubricant into the reducer. The viscosity of the lubricant is selected according to the following list. The gear unit is usually equipped with a grease hole and a drain plug. Therefore, the installation position must be specified when ordering the gear unit. Note: For applications with unconventional working conditions, please consult the manufacturer. The working oil temperature should not exceed 80 °C. The life-lubricated combination reducer is filled with synthetic oil at the manufacturer. In addition, the gear unit is usually supplied without oil and has a filler plug and a drain plug. Set the position of the oil level plug according to the installation position specified at the time of ordering to ensure correct oil filling. The oil volume of the gear unit should be determined according to different installation methods. If the transmission power exceeds the heat capacity of the gear unit, an external cooling unit must be provided.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn