How to control the rapid accumulation of aluminum in alkaline solution?
The COVID-19 Antigen Saliva Test kit is a lateral flow immunoassay intended for the preliminary screening and qualitative detection of nucleocapsid protein antigen from severe acuterespiratorysyndrome coronavirus SARS-CoV-2which causesthe Coronavirusdisease(COVID-19),in direct saliva sample from individuals suspected of coVD-19 by their healthcare provider within the first seven days of symptom onset.The COVID-19 Antigen Saliva Test kit is for professional use only and is intended to be used as an aid in the diagnosis of SARS CoV-2 infection. saliva antigen rapid test kit,antigen test saliva,antigen saliva test kit,rapid antigen saliva Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedicals.com
In order to reduce the rapid accumulation of aluminum in the alkaline solution, we must first pay attention to the following aspects:
(1) Carefully and carefully pre-treat alkaline parts. If the surface of the pre-alkali corrosion product is heavily oiled or has other contaminants that cannot be removed by the alkaline solution, the alkali etching time must be prolonged, and the aluminum in the alkaline solution will inevitably increase.
(2) Strictly control the process conditions. High concentration, high temperature, and long-term etching in the alkaline etching solution will inevitably accelerate the corrosion of aluminum, which may cause excessive corrosion and accelerate the accumulation of aluminum.
(3) A variety of auxiliary materials, such as sodium carbonate, sodium phosphate, sodium silicate, sodium metasilicate, and emulsifier, are added to the alkali etching solution based on sodium hydroxide. The addition of these materials can enhance the emulsification, saponification of the alkaline solution, and the ability to remove oil on the surface of the part, as well as increase corrosion inhibition and improve wetting and dispersion. It can be seen from these materials that these materials can both reduce the amount of alkaline corrosion and completely eliminate oil pollution. Therefore, it is not simply considered that alkaline etching is the etching of the aluminum oxide layer with sodium hydroxide. Some units even have only sodium hydroxide as a material in the alkaline solution. This is obviously not correct. According to this process, more aluminum will be eroded and it will be difficult to remove all the oil.
SARS-CoV-2is anenvelopedsingle-stranded RNAvirus ofthe Baenus COVD-19 is an acute respiratory infectious disease. People are generally susceptible.Currently. the patients infected bytheSARS-CoV2are the main source ofinfection:asvmptomatic infected peope car also be an infectious source Based on thecurrentepidemiologica investigation, the incubation period is 1to 14 daysmostly 3to 7 days The main manifestations include feverfatigue and drycough.Nasa congestion, runny nosesore throatmyalgia and diarhea are found in a few cases.
Results are for the identification of SARS-CoV-2 nuceocapsid protein antigen. The SARS-CoV-2 antigen is generally detectable in upper respiratory specimens during the acute phase ofinfectionPositive results indicate the presence of SARS-CoV-2viralantigenshowever cinicai corelation with patient history and other diaanostic information is key to determine status of infection.Positive results don't preclude bacterialinfection or co-infection with other yiruses.eaatveresuts To patients with symptom onset for more than seven days should be treated as presumptive and confirmation with a molecular assayand patient management may be performed according to local regulations as needed.