How to decorate rough room inspection room
Buying a new house now is basically a rough house and needs to be renovated. However, the renovation is a very complicated matter, especially for the first time the owners of the renovation, it is even more troublesome thing. Well, this time we need to understand some of the decoration of knowledge, so that we can bring a lot of help to the decoration. Next, we will introduce how to decorate the rough room and notice the inspection of the rough room. How to decorate the rough room 1, choose good days auspicious days, ready to launch artillery start Before decorating the rough house, choose a good day and start firecrackers. 2, measuring the indoor area Before the workers enter the venue, they must first measure each corner, record it with a pen, and mark it clearly. The measurement includes: blank room tiling area, wall paint area and floor and wallpaper area, but also pay attention to the size of the furniture placed on the wall. 3, the main demolition reform When the rough house is renovated, it is necessary to dismantle the main body, including the demolition of walls, walls, shovels, etc. However, it should be noted that the dismantled garbage should be handled in a timely manner to ensure that the interior is clean. 4, hydropower reform When hydropower is reformed, it is possible to put cabinets, range hoods, cookers, and other furniture and appliances in a good position to facilitate wiring. If it is not planned in advance, it will bring inconvenience to the future life. Before the hydropower reform, we must let the master cabinet master to measure the size in advance, determine the position of the power supply and the direction of the waterway. 5, wallpaper Before sticking the wallpaper, the rough room wall must first be painted, and then dried and then put on the wallpaper, and the wallpaper is not imagined so dirty, in fact, is a special clean living. 6, install the socket The best outlet is to buy a socket with a switch function, especially the kitchen, more electrical appliances, so you can avoid frequent plug, use the switch control. 7, install the cabinet The installation of cabinets is more complicated because it needs to cooperate with other products. It is better to bring the range hoods, stoves and sinks together on the same day so that any problems can be solved at the first time. 8, install hardware and floor Before installing the floor, you can first install the racks, curtain rods, lamps, bathroom and other hardware, and then install the floor, because the hardware installed when more than gray, you can avoid the floor damage. 9, furniture appliances approach After the hard-installation is completed, household appliances and furniture can enter the market. Before entering the market, furniture appliances should be prepared with disposable shoe covers, activated carbon, ladders, and floor protection films. Blank room inspection room matters needing attention 1, all exterior finishes, including balcony, rain cover exterior finish inspection. 2. Inspection of public places, public facilities, electrical equipment and other items. 3, the pipeline of water, pressure test and heating thermal commissioning and other checks. 4. The roofing project will carry out water storage and watering tests. 5, each room using prefabricated floor or cast-in-place roof inspection. 6. For the room with waterproof requirements, the ground shall be planned strictly in accordance with the waterproof layer and protective layer construction requirements. Two water storage tests shall be conducted during acceptance. Editor's summary: How to decorate the rough room and check the rough room inspection room is introduced here, I hope to be helpful to everyone, want to know more relevant knowledge can focus on this site information. How to decorate the rough room Chuzhou Jincheng Metalwork Co.,Ltd , https://www.jinchengscaffold.com
