Identify the quality techniques of centrifugal glass wool felt
Centrifugal glass wool felt is the oldest and most versatile sound absorbing material. It is widely used in the sound insulation, heat preservation and fire prevention of light exterior wall insulation boards. Because it is usually used for the sound insulation of light exterior insulation boards. The typical structure of this lightweight exterior wall insulation board is: gypsum board + keel + centrifugal glass wool board + gypsum board centrifugal glass wool board here plays the sound absorption function, the absorption part of the sound wave passing through the gypsum board can be reduced The sound waves are reflected back and forth in the cavity formed between the gypsum board, the keel and the gypsum board, so as to improve the sound insulation of the outer wall insulation board. The density of centrifugal glass wool felt sold in the building materials market generally does not exceed 60kg/m3, the sound insulation effect is not good and the hand feel is very soft, and it is easy to completely lose its soundproof function due to sagging; The amount of glue - the special centrifugal glass wool felt board is hand-continued to ensure the uniformity and strength of the cotton layer. It is pressed by such high temperature and does not need to add too much adhesive, so that the centrifugal glass wool can be well maintained. The fire performance of the felt. The centrifugal glass wool felt sold in the building materials market adds a large amount of glue to maintain the strength at low density, which not only reduces the fireproof performance, but also causes the centrifugal glass wool felt to sag and sag; Dimensions - special centrifugal glass wool felt board is convenient for construction. According to the standard spacing of the keel, the width is determined to be 800mm, 600mm, 400mm, etc., so that it is not necessary to cut the price of the A-grade fireproof rock wool board during construction. Therefore, the stimuli of the centrifugal glass wool felt scraps are reduced. After the optimized design, the special centrifugal glass wool felt board of the mute treasure partition wall can improve the sound insulation effect of the light external wall insulation board by more than 10 decibels.
The LED underwater light is a light that is placed under the water. The appearance is small and exquisite, and the appearance is elegant. As an underwater lighting fixture, LED underwater light is widely used in various sightseeing places such as square parks. It is the perfect choice for fountains, theme parks, exhibitions, commercial and art lighting.Most of the materials are made of stainless steel and glass. The types of stainless steel are 201, 304, 316, etc.This lamp is designed with fully tempered safety glass, wide light radiation surface, strong transparency.The interior of the luminaire is highly waterproof and has a protection rating of IP68 or higher .All adopt imported high-power LED as light source, which has obvious advantages such as long life, low power consumption, pure color and no pollution. With the DMX512 control system, it can achieve a variety of color changes.If you want to know more, please contact us.
Underwater Lights,Submersible LED Lights,Underwater Boat Lights,Underwater Fishing Lights JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.walllightindoor.com