Installation requirements for boiler steam flow meters
Iron Wire,Black Annealed Wire,Low Carbon Steel Iron Wire,PVC Coated Steel Wire Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com
The boiler steam flow meter can be installed indoors or outdoors. If installed in a well and flooded, choose a submersible sensor or transmitter. The vortex flowmeter can be installed horizontally, vertically or obliquely on the pipe, but when measuring liquid, the pipe must be filled with liquid. Therefore, a vortex flowmeter is installed on a vertical or inclined pipe, and the flow direction of the liquid bead should be from bottom to top. There should be a long straight pipe section on the upstream side and the downstream side of the vortex street flowmeter. The required length of the upstream and downstream straight pipe sections varies with the pipe condition. The upstream of the vortex flowmeter should avoid installing the regulating valve or the half-opening valve. The regulating valve or the half-opening valve should be installed after the 5D downstream of the flowmeter. The piping for installing the vortex flowmeter must be the same as the inside diameter of the flowmeter, otherwise the piping must be tapered. Users can design and install according to the specific conditions of the pipeline and construction, according to the relevant sections in the operation manual of this product. When designing the pipeline installation, the upper end of the sensor or transmitter amplifier should have 500mm space for easy debugging and maintenance. When the flowmeter needs temperature compensation, the pressure transmitter is installed upstream of the flowmeter 1D, temperature measuring component ( Usually installed with platinum resistance PT100) downstream 3~5D 