Introduction of 5 types of sewage pump
The sewage pump mainly transports various kinds of sewage-like medium such as domestic sewage, industrial wastewater or corrosive liquid containing particles or liquid without particles. The types of sewage pumps are mainly divided into the following types of sewage pumps. Transportation of various sewage-like media such as domestic sewage, industrial wastewater or corrosive liquid containing particles or liquids without particles can be transported. The types of sewage pumps are mainly divided into the following types: Spring Spring,Large Spring Spring,Customization Of Spring Springs,Customized Processing Of Spring Springs Dongguan Jiufukai Hardware Products Co., Ltd , https://www.jfkspring.com
1. Diving non-blocking sewage pump: The submersible sewage pump is mainly a pump type product that must be submerged by water. It mainly adapts to the conditions of convenient carrying and moving and the place without land installation space, and also saves the advantages of building a pump house. The shortcoming is that the entire motor is sneaked into the liquid. At present, the submersible sewage pump can not transport the flammable and explosive liquid. The type of the submersible sewage pump is mainly divided into a cutting type, a mixing type, and a mixing type.
2. Self-priming non-blocking sewage pump: The main feature of self-priming sewage pump is that it is installed on the land and has a self-priming capacity of about 6 meters. The highest configuration of self-priming pump without irrigation in Yiling Pump Industry can reach 8-10 meters. The advantages of the self-priming sewage pump and the submersible sewage pump are that it is easy to overhaul and does not burn the motor due to leakage of the mechanical seal like the submersible sewage pump. The types of self-priming sewage pumps are divided into two types: direct connection and coupling type.
3. Non-blocking pipe sewage pump: The main feature of the pipe sewage pump is that it is similar to the vertical centrifugal pump. It adopts the left-in and right-out mode. The inlet and outlet are on the same horizontal line, mainly for boosting and conveying various kinds of similar particles with sewage. Medium. The type of sewage pump is only cast iron, stainless steel "target=_blank> stainless steel, ball-milled cast iron, duplex stainless steel" target=_blank> stainless steel.
4. Vertical non-blocking sewage pump: The main feature of the vertical sewage pump is that the inlet is at the lower outlet and the direction of the inlet and outlet can be arbitrarily adjusted. The main purpose is to adapt to the installation space. A bottom valve can be installed at the suction port under the pool. Water directly installed in the sink on the pool surface. The type of vertical sewage pump can be divided into submerged long shaft type, vertical land type or submersible sewage pump, which can also be called vertical sewage pump.
5. Horizontal non-blocking sewage pump: The type of horizontal sewage pump can be divided into direct connection type and coupling type. The structural parameters are the same. The main feature of the direct-connected horizontal sewage pump is that the impeller is on the motor shaft. The installation space with the coupling type is reduced, and the noise is lower than that of the horizontal sewage pump with the coupling type.
The type of sewage pump is basically the above types, and other special requirements of the sewage pump series can be customized according to user requirements.
Http://NewsDetail325T1.htmlChina Hardware Business Network http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn