Introduction to the connection method of cable TV distributor
Nowadays, the TV programs are rich and colorful, and personal preferences are different. Therefore, some families will have two or more TVs. How to use a cable TV splitter to implement a signal line for multiple TVs? Let's talk about this topic below. Our most common dispenser is a two-distributor: IN on the distributor is the inlet hole and two OUT are the outlet holes. Cable TV splitter connection In the access terminal F head is inserted into the optical cable, and the coaxial part of the optical cable is packaged with a 1 cm bare copper wire inserted into the distributor; the same is connected to the user terminal. Finally, the optical fiber cable and the F-head connection portion are wrapped with a tape to prevent falling off and clutter. Use the F head and rotate it clockwise. When the wire is connected, the core should not be connected to the outer shield. The most important consideration in the cable TV splitter connection is that the wire and the outer shield wire cannot be touched. The above is a brief introduction to the cable TV splitter connection, reminding everyone that the required cables should go to the professional market, purchase products that are recognized by the relevant national departments, and at the same time, please operate by professional personnel to reduce the signal attenuation. Stainless Steel Bathtub Faucet Stainless Steel Bathtub Faucet,Stainless Steel Tub Spout,Stainless Steel Tub Shower Faucets,Stainless Steel Tub Faucet Heshan Janno Kitchen and Bath Technology Co.,Ltd , https://www.janno-ks.com