Jaw crusher during storage should pay attention to the problem
There are many kinds of protective gloves. In addition to chemical resistance, there are also anti-cutting, electrical insulation, waterproof, cold resistance, thermal radiation protection, fire retardant and other functions. It should be noted that the general acid and alkali resistant gloves are not the same as the chemical resistant protective gloves. So when needed, you should choose protective gloves that prevent all kinds of chemicals from penetrating.
The correct use of
safety gloves and goggles,safety gloves electrical work,safety gloves for woodworking,safety gloves rubber Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com
First of all, to prevent rust. Jaw crushers should be parked in a dry space during storage, and the equipment should be arranged in an orderly manner. It is strictly forbidden to arrange conductive objects on the batteries. The arrangement of the batteries should also be placed in a dry and frost-proof place during storage. The machine should be guaranteed to start once a month. The parking jaw crusher should be covered with a cover cloth to prevent the fuel tank from rusting. The Jaw Crusher during parking should place the mechanical fuel lever in the idle position.
The maintenance and maintenance of equipment is very important, enabling companies to save resources, reduce production costs, and improve corporate profits. Luoyang Expo Leasing Co., Ltd. adapted to the needs of the development of the times, launched various crusher leasing and other services, and achieved a win-win situation for the common development of enterprises and customers. Welcome customers to negotiate guidance.
Reprint please indicate the source: Crusher leasing
1. Check whether the gloves are damaged before each use
2. Wear protective gloves before handling harmful substances or operating dangerous procedures
3. Avoid exposure of pollutants and contact with the skin after removing the contaminated gloves
4. Contaminated gloves should be wrapped before being discarded
5. Reuse protective gloves should be thoroughly cleaned and air-dried after use
6. Choose gloves of the right size
Maintenance method
1. Put protective gloves in a dry, dark and constant temperature environment
2. When there are a large number of chemical substances remaining, use appropriate solvent to clean, but avoid using corrosive cleaning fluid
3. Dry the gloves thoroughly after washing. Do not use heat to dry the gloves unless instructed by the manufacturer, as it will age the gloves quickly
Proper use and maintenance can properly increase the service life of protective gloves.
