Jig saw safety operation procedures
1. Before the operation, check the tools according to the requirements, whether the position of each part of the tool is normal and firm, whether the tool is clamped, whether the safety protection device is reliable, and whether there is any leakage. Second, do not pass through loose clothes, bare long hair, jewelry, badges and other operating machines, because they may be entangled in the running parts. Keep your pace steady and it is best to wear rubber soles. 3. Hold the tool tightly with your hand during operation. Apply even pressure and do not apply pressure directly to the body. Fourth, to avoid cutting to nails. Before working, carefully inspect the workpiece and remove all nails. 5. Keep hands and body parts away from rotating parts. 6. When the tool is running, do not let go, or place it at will. 7. The operator must not operate in an irritated, exhausted state. 8. Check the tool carefully for cracks and damage before use. If it is found, it must be replaced in time. Nine, no-load operation, check and confirm that the machine linkage is flexible. Ten, the tool button must be sensitive and reliable. XI. If abnormal sound is found during operation, stop using it immediately. Concerned about surprises Label: Safety procedures for jigsaw Previous: Hardware invisible screen window maintenance tips Next: Fingerprint lock can be unreliable, mainly look at the following points High Voltage Led Strip Light,Led Strip Light For Outdoor Decoration,Waterproof Led Strip Light,Double Row Led Strip Light Shenzhen You&My Electronic Technology Co., Ltd , https://www.youmysolarlight.com