Package water pipe construction process and matters needing attention

The sound of the bathroom plumbing is particularly large, and the purpose of the plumbing is to be soundproof. There are still many ways to package water pipes. Both the owner and the designer should be familiar with it. Today, we will introduce the construction process and precautions for the water pipes under the package.

First, the definition of guarantee

The tube is generally covered with red bricks (commonly known as kiln bricks) or gypsum board, wood to enclose the bathroom, the kitchen and the balcony, in order to play a beautiful role.

Second, the commonly used materials

Mason covered the commonly used materials as:

Red brick, cement, sand

Cement board, light steel keel or wooden keel

Woodworking materials commonly used for:

Light steel keel or wooden keel, big core board, gypsum board

Third, the construction process of guarantee
There are many methods for the construction of packaged water pipelines. There are four common types of methods, namely bricklaying method, wood keel method, light steel keel method, and plastic aluminum plate method.

Bricklaying

The bricklaying method was carried out by a mason. Before the tiling, the brickwork was made of red brick and the riser was wrapped up. That is, with red bricks or 5 cm of light bricks standing erect, after the completion of the boulevard to dry it with a suitable mortar can be cement mortar, plaster and then tiling, including the riser even completed. Matters needing attention: in the bucket should pay attention to close to the pipeline, do not waste space, to wait for the formation of the basic doubling of the bucket after the plaster and then gray, so that it is more robust. After erecting the riser, it is best to hang the barbed wire to enhance the firmness. Features: The use of bricklaying legislation riser, sound insulation is good, relatively strong, not easy to deformation, not sticking after the tile is not easy to fry. However, there are problems of being relatively thick and taking up more space.

Wooden keel method

The construction method of wooden keel is the simplest and most convenient method. The wooden keel is used to erect the bracket, and then the cement pressure plate is nailed on the top and plastered after plastering. Matters needing attention: Because the wood keel is made of wood material, it is easy to corrode in a humid environment. Therefore, after installation, waterproof the root of the standpipe before the tile is installed to prevent the ground water from flowing into the standpipe and dipping into the wooden keel. In addition, the best selection of wood keel should be rough, it is best to reach 3*4 cm above specifications to prevent deformation cracking. Features: The use of wooden keel and cement pressure plate method, the construction is simple and easy, but there are cases of moisture absorption, mildew, deformation, etc., tiles are also easy to fry.

Light steel keel method

The light steel keel plus cement pressure riser is not easily deformed, and is currently the most commonly used material. However, construction materials must be carefully used, and the best quality light steel keel is best used to prevent rust deformation. At the same time, whether the construction process is correct or not will affect the quality of the riser tube.

Formal construction method: generally use four light keels made frame, after inspection and acceptance, then close the cement pressure board, hanging wire mesh, and finally attached to the magnetic film.

Informal construction methods: Use only three light keel and two cement pressure plates. The light keel does not form a frame, but plays a connecting role. This is not strong enough, but it saves money.

Buckle plate

The buckle plate method refers to a method of directly forming a frame to cover a riser using a ceiling buckle plate. It does not require a magnetic patch, making it very convenient. It is more suitable to wrap up the riser after home decoration.

Install the plastic gusset: Add the Yangjiao line on the wooden keel, and install the gusset plate upwards from the lower end directly. The method is simple, but the appearance is not beautiful enough, and it is not very matched with the surrounding wall surface.

Install aluminum-plastic panel: nail a nine-percent board on the wooden keel, and then use a universal adhesive to stick the aluminum-plastic panel. There are many kinds of colors in the aluminum-plastic panel, and the effect of the decoration is close to that of the magnetic sheet. However, the angle of the aluminum-plastic composite sheet is easily cracked, so thicker sheets must be used.

Fourth, ensure that the considerations

Entrustment should pay attention to the external location of the pipeline, such as in the bathroom where the humidity is heavy should be entrusted by the mason. Such as in the balcony and other dry, well-ventilated place can be considered woodworking tube, but should pay attention to if the tube surface brushing latex paint, should be covered with a layer of gypsum board to prevent cracking, fall off, after the end of the wall paint and other issues. If it is a kitchen gas pipeline, consider a semi-closed treatment by the cabinet company.

Decoration Construction Knowledge Balcony Three Trees Paint Cement Paint Home Decor Home Latex Paint Decoration Partition Cabinet Red Brick Home Kitchen Cabinets Kitchen Doors Toilets Waterproof Bathroom Tiles Tiles Plastic Kitchen Tiles Balcony Tiles

15000 Lbs Electric Winch


We were founded in Y2015 at Singapore Industry Park, Suzhou, which is half hour`s car ride from Shanghai. In Y2019, we setup our HONGKONG office to support the growing of oversea business. We has established two business units to support different market strategy. Winch is our star product in off-road BU. We provide electric winch various from 2000lbs to 20000lbs, serve the industry for ATV/UTV, Jeep and truck. We also provide hydraulic winch from 10000lbs to 20000lbs, to serve the professional rescue industry. To ensure our winch always has best quality and best cost, we manufacture each key component by ourselves, like motor, gear box, rack, etc. Our manufacturing process covers Aluminum die-casting, punching, machining, CNC, and so on. Our quality department follows ISO 9 0 0 1 to control the process quality and the product quality. We provide our customer OEM/ODM service. The new design will be provided to support the new developed customer and protect the existing customer as well.

Our company utilized the on-line and off-line business model to enhance better customer service strategy. We have been striving to create value to our customer, supplier as well as our staff. Through us, we will live out the vision of glorifying God and benefiting people.


14500

15000lbs Winch, electric winch for trailer, 12v winch for sale,winch motor

Suzhou DAO Material Technologies Co.,Ltd , https://www.dao-compass.com