Paving solid wood flooring must do a moisture barrier (Figure

The variety, specification, grade, color and wood moisture content of wood floor engineering materials should meet the design requirements and the provisions of the current national standards, and the water content should generally not exceed 10% if no design is required.



The base layer is damp-proofed before pavement.


The wood keel, wool floor, and stump used for laying the floor base must be installed firmly and straight.


The nailing or bonding of the wooden floor covering and the base floor must be firm and loose.


When the flooring is not used, the keel spacing shall be calculated based on the length-width module of the floor, the spacing between the main keel shall not be greater than 300mm, and the floor seam shall be on the centerline of the keel.





539) {this.resized=true; this.width=539;}" border=0>

Nature floor del floor

Manual Mounting Machine

The vacuum system provides excellent pore impregnation in a compact form. As a result, edge retention is improved and refined samples are supported during grinding and polishing. Compression installation is the preferred method for achieving the best edge retention and highest throughput. Provides compression mounting systems and mounting compounds designed to meet the different needs of different laboratories

Manual Mounting Machine,Hardness Inspection Metallographic,Mounting Press Equipment,Cold Mounting Sample Preparation

TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com