Prestressed Concrete Post Stressing Prestressed Round Anchor

Model NO.: YJM15(13)
Wedge: Two Parts or Three Parts
Wedges Hardness: HRC58-65
Performance: Good
Anchorage Ranges: 1 Strands to 55 Strands
Trademark: CNM
Specification: SGS, ISO9001-2008, BV
Origin: Hennan Province
HS Code: 7316000000
Model NO.: YJM15(13)
Wedge: Two Parts or Three Parts
Wedges Hardness: HRC58-65
Performance: Good
Anchorage Ranges: 1 Strands to 55 Strands
Trademark: CNM
Specification: SGS, ISO9001-2008, BV
Origin: Hennan Province
HS Code: 7316000000
Prestressed Concrete Post Stressing Prestressed Round Anchor

1. Descriptions

1). Type: Single-hole, Multi-hole; Circular, Flat. 

2). Parts: Anchor Ring/Plate, Wedge, Base Plate etc.

3). Have a high anchor efficiency and very good performance.

4).  We can manufacture all kinds of anchorage and prestressed equipment according to your requirement and drawings. 

2. Applications:  It has been widely adopted by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials, such as bridge construction, railway and highway construction,  underground structures,buildings and channel construction, ect. 


Pictures for Prestressed Anchor System





3. Features:

YJM anchorage system is consists of stressing-end anchorage, fixed-end anchorage, couple and corrugated pipe. It can be divided into YJM10, YJM11, YJM13, YJMM15, YJM18, YJM22 series of round anchors and BJM15, BJM13 series of flat anchors. Please see the follows: 

1). YJM15 applies to 15.2/15.24mm, 15.7mm pc strand. 

2). YJM13 applies to 12.7mm, 12.5mm & 12.9mm pc strand.

3). YJM10 applies to 9.3mm, 9.53mm pc strand. 

4). YJM11 applies to 10.8mm pc strand.  

5). YJM18 applies to 17.8mm pc strand.

6).  YJM22 applies to 21.6/21.8mm pc strand. 



4. Our Advantages:


We are PT Manufacturer from China, our full products range for post tensioning and pre-strssing construction:

1. Materials: pc strand, YJM anchor system(monostrand anchor, multistrands anchor), mining anchor system, ducts(metal ducts, HDPE plastic ducts), PC Strand.
 
2. Equipment: Hydraulic Jack(QYC mono jack, YDC multi-strand tensioning jack), electric oil pump, YH30 embossing machine(onion jack), GYJ500 extrusion machine, ZG130 ducts making machine, grouting pump and mixer for post tensioning).
 
3. Bridge Equipment: Bridge Crane, Bridge Girder Launching Machine, Bridge Girder Transporting Vehicle, etc.

Samples Exhibiton for Different Kinds of Anchorage System(Experienced OEM and ODM Services)




 
5. FAQ:
 
1): Q: Do you supply OEM Service or Customized-made Anchorage System?
A Yes, we do. Actually, we have cooperated with many famous PT Supplier in whole world.Just send us your drawings when need to be customized.
 
2) Q: Do you provide free samples?
A: Yes, sure, we provide free samles for your testing.
 
3) Q: How is the delivery lead time:
A: Goods in stock: within 3 days, Goods out of stock(7 days), Goods need to be customized(10-15 days).
 
4) What is your Minimum Order?
A: MOQ: 100 pieces.
 
5) Q: Payment Terms?
A TT, LC, Western Union, Paypal, etc.
 
6) Q: How to transport the goods:
A: by shipping, airflight, express.


 

6. YJM13-QYM Stress End Anchor System Technical Data:


 
 		 ΦD B A L  ΦC  ΦG  ΦH d n
 
YJM13-QYM1 1 40 45 90 60 Φ35 60 30 6 3 QYC270
YJM13-QYM2 2 78 46 120 80 Φ40 110 30 6 3 YDC 650
YJM13-QYM3 3 78 46 120 80 Φ45 120 30 8 3 YDC 650
YJM13-QYM4 4 85 46 130 85 Φ50 130 40 10 4 YDC 1000
YJM13-QYM5 5 92 46 140 97 Φ50 140 50 12 4 YDC 1500
YJM13-QYM6/7 6/7 103 48 160 120 Φ60 160 50 12 4 YDC 1500
YJM13-QYM8 8 116 48 170 120 Φ60 170 50 12 4 YDC 2000
YJM13-QYM9 9 126 50 180 150 Φ70 180 50 12 4 YDC 2000
YJM13-QYM10 10 136 50 192 160 Φ80 180 50 14 4 YDC 2500
YJM13-QYM11/12 11/12 136 50 192 160 Φ80 190 50 14 5 YDC 2500
YJM13-QYM13 13 146 50 210 170 Φ80 210 50 14 5 YDC 3000
YJM13-QYM14 14 146 55 210 170 Φ80 210 50 14 5 YDC 3000
YJM13-QYM15 15 166 55 220 205 Φ90 220 60 14 5 YDC 3500
YJM13-QYM16 16 176 55 250 220 Φ90 250 60 14 5 YDC 3500
YJM13-QYM17 17 176 60 250 230 Φ90 250 60 16 5 YDC 3500
YJM13-QYM18 18 176 60 250 230 Φ90 250 60 16 5 YDC 4000
YJM13-QYM19 19 176 60 250 230 Φ90 250 60 16 5 YDC 4000
YJM13-QYM22 22 186 65 260 240 Φ200 260 60 16 6 YDC 5000
YJM13-QYM25 25 206 70 280 240 Φ200 280 60 18 6 YDC 5500



7. YJM15-QYM Stress End Anchor System Technical Data:
 

Anchor Model The Number of PC Strand Anchor Head/Plate Corrugated Pipe I.D. Anchor Barrel Spiral Reinforcement Tension Jack Model
A x B x ΦD  ΦD ΦE x F ΦG x ΦH x L Cycles
 
YJM15-1 1 80x80xΦ12 Φ50 Φ45x45 70x Φ6x30 4 QYC270
YJM15-2 2 135x70xΦ58 Φ50 Φ78x45 100x Φ8x40 4 YDC 1000
YJM15-3 3 135x70xΦ58 Φ50 Φ88x48 100x Φ8x40 4 YDC 1000
YJM15-4 4 136x80xΦ62 Φ55 Φ98x48 130x Φ10x40 4 YDC 1000
YJM15-5 5 146x80xΦ62 Φ55 Φ103x48 140x Φ10x50 4 YDC 1100
YJM15-6 6 162x100xΦ78 Φ70 Φ117x48 160x Φ12x50 4 YDC 1500
YJM15-7 7 162x100xΦ78 Φ70 Φ117x50 160x Φ12x50 4 YDC 1500
YJM15-8 8 176x120xΦ88 Φ80 Φ127x50 170x Φ14x50 5 YDC 2000
YJM15-9 9 183x120xΦ90 Φ80 Φ137x50 180x Φ14x50 5 YDC 2000
YJM15-10 10 210x120xΦ100 Φ90 Φ147x50 210x Φ14x60 5 YDC 2500
YJM15-11 11 210x140xΦ100 Φ90 Φ157x50 210x Φ14x60 5 YDC 2500
YJM15-12 12 210x140xΦ100 Φ90 Φ157x50 210x Φ14x60 5 YDC 2500
YJM15-13 13 210x140xΦ100 Φ90 Φ157x55 210x Φ14x60 5 YDC 3000
YJM15-14 14 234x160xΦ100 Φ90 Φ167x60 230x Φ16x60 5 YDC 3000
YJM15-15 15 234x160xΦ100 Φ90 Φ167x60 230x Φ16x60 5 YDC 3500
YJM15-16 16 244x180xΦ100 Φ90 Φ177x60 230x Φ16x60 5 YDC 3500
YJM15-17 17 250x180xΦ100 Φ90 Φ187x65 230x Φ16x60 5 YDC 3500
YJM15-18 18 265x200xΦ110 Φ100 Φ187x65 250x Φ16x60 5 YDC 4000
YJM15-19 19 265x200xΦ110 Φ100 Φ187x65 250x Φ16x60 6 YDC 4000
YJM15-20/21/22 20/21/22 310x240xΦ130 Φ120 Φ215x70 300x Φ18x60 6 YDC 4600
YJM15-23 23 310x240xΦ140 Φ130 Φ217x70 300x Φ22x60 6 YDC 5000
YJM15-25/26/27 25/26/27 350x290xΦ140 Φ130 Φ260x90 310x Φ22x60 7 YDC 6500
YJM15-30/31 30/31 370x290xΦ150 Φ140 Φ290x105 400x Φ22x60 8 YDC 6500
YJM15-34/37 34/37 465x340xΦ170 Φ160 Φ320x112 450x Φ22x60 8 YDC 8000
YJM15-43/44 43/44 500x450xΦ170 Φ160 Φ345x130 470x Φ22x60 8 YDC 10000
YJM15-54/55 54/55 500x510xΦ170 Φ160 Φ380x160 520x Φ24x61 8 YDC 12000
 

Welcome to your inquity and visting!
Mobile  Phone No.: +8613673713569
Jason Wang


Pictures for QC in Quality Checking Department(Strict Quality Controlling)



Further Information for Complete Anchor System:

Wedge

Wedge is the key part of anchorage system, which is made by high-class alloy steel 20CrMnTi. Its form is divided into two-chip and three-chip. The system apply to the two-chip YJM15-J, it can be used for ring anchorage, flat anchorage, but also used for porous coupler.

Anchorage ring


Anchor ring is the key part of bearing the Prestressing tension. The ring anchorage is made by 45# high-quality carbon construction steel, and the flat anchorage is made by 40Cr steel. It includes the ring anchorage head and flat anchorage head.


Bearing plate


Bearing plate is the key component, which transfer the load from anchorage ring to concrete under anchor. The method of transfer and distribution of stress affect the anti-cracking and load capacity of concrete.

Bursting reinforcement

The bursting reinforcement used for distributing the concrete. For prevent concrete from crazing, and use the bursting reinforcement for strengthening tendons.


Metal Bellows(mental ducts). And we have metal bellows moulding machine and flat pipe machine.


Metal bellows used for the post-tensioning prestress concrete structure or constructive pore-forming. It can be divided into ring and flat by the section shape; Divided into standard and enhanced by radial stiffness; Divided into metal and plastic tubes by material, and the metal can be divided into galvanized and ungalvanized. Prestressed Concrete Post Stressing Prestressed Round Anchor

1. Descriptions

1). Type: Single-hole, Multi-hole; Circular, Flat. 

2). Parts: Anchor Ring/Plate, Wedge, Base Plate etc.

3). Have a high anchor efficiency and very good performance.

4).  We can manufacture all kinds of anchorage and prestressed equipment according to your requirement and drawings. 

2. Applications:  It has been widely adopted by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials, such as bridge construction, railway and highway construction,  underground structures,buildings and channel construction, ect. 


Pictures for Prestressed Anchor System





3. Features:

YJM anchorage system is consists of stressing-end anchorage, fixed-end anchorage, couple and corrugated pipe. It can be divided into YJM10, YJM11, YJM13, YJMM15, YJM18, YJM22 series of round anchors and BJM15, BJM13 series of flat anchors. Please see the follows: 

1). YJM15 applies to 15.2/15.24mm, 15.7mm pc strand. 

2). YJM13 applies to 12.7mm, 12.5mm & 12.9mm pc strand.

3). YJM10 applies to 9.3mm, 9.53mm pc strand. 

4). YJM11 applies to 10.8mm pc strand.  

5). YJM18 applies to 17.8mm pc strand.

6).  YJM22 applies to 21.6/21.8mm pc strand. 



4. Our Advantages:


We are PT Manufacturer from China, our full products range for post tensioning and pre-strssing construction:

1. Materials: pc strand, YJM anchor system(monostrand anchor, multistrands anchor), mining anchor system, ducts(metal ducts, HDPE plastic ducts), PC Strand.
 
2. Equipment: Hydraulic Jack(QYC mono jack, YDC multi-strand tensioning jack), electric oil pump, YH30 embossing machine(onion jack), GYJ500 extrusion machine, ZG130 ducts making machine, grouting pump and mixer for post tensioning).
 
3. Bridge Equipment: Bridge Crane, Bridge Girder Launching Machine, Bridge Girder Transporting Vehicle, etc.

Samples Exhibiton for Different Kinds of Anchorage System(Experienced OEM and ODM Services)




 
5. FAQ:
 
1): Q: Do you supply OEM Service or Customized-made Anchorage System?
A Yes, we do. Actually, we have cooperated with many famous PT Supplier in whole world.Just send us your drawings when need to be customized.
 
2) Q: Do you provide free samples?
A: Yes, sure, we provide free samles for your testing.
 
3) Q: How is the delivery lead time:
A: Goods in stock: within 3 days, Goods out of stock(7 days), Goods need to be customized(10-15 days).
 
4) What is your Minimum Order?
A: MOQ: 100 pieces.
 
5) Q: Payment Terms?
A TT, LC, Western Union, Paypal, etc.
 
6) Q: How to transport the goods:
A: by shipping, airflight, express.


 

6. YJM13-QYM Stress End Anchor System Technical Data:


 
 		 ΦD B A L  ΦC  ΦG  ΦH d n
 
YJM13-QYM1 1 40 45 90 60 Φ35 60 30 6 3 QYC270
YJM13-QYM2 2 78 46 120 80 Φ40 110 30 6 3 YDC 650
YJM13-QYM3 3 78 46 120 80 Φ45 120 30 8 3 YDC 650
YJM13-QYM4 4 85 46 130 85 Φ50 130 40 10 4 YDC 1000
YJM13-QYM5 5 92 46 140 97 Φ50 140 50 12 4 YDC 1500
YJM13-QYM6/7 6/7 103 48 160 120 Φ60 160 50 12 4 YDC 1500
YJM13-QYM8 8 116 48 170 120 Φ60 170 50 12 4 YDC 2000
YJM13-QYM9 9 126 50 180 150 Φ70 180 50 12 4 YDC 2000
YJM13-QYM10 10 136 50 192 160 Φ80 180 50 14 4 YDC 2500
YJM13-QYM11/12 11/12 136 50 192 160 Φ80 190 50 14 5 YDC 2500
YJM13-QYM13 13 146 50 210 170 Φ80 210 50 14 5 YDC 3000
YJM13-QYM14 14 146 55 210 170 Φ80 210 50 14 5 YDC 3000
YJM13-QYM15 15 166 55 220 205 Φ90 220 60 14 5 YDC 3500
YJM13-QYM16 16 176 55 250 220 Φ90 250 60 14 5 YDC 3500
YJM13-QYM17 17 176 60 250 230 Φ90 250 60 16 5 YDC 3500
YJM13-QYM18 18 176 60 250 230 Φ90 250 60 16 5 YDC 4000
YJM13-QYM19 19 176 60 250 230 Φ90 250 60 16 5 YDC 4000
YJM13-QYM22 22 186 65 260 240 Φ200 260 60 16 6 YDC 5000
YJM13-QYM25 25 206 70 280 240 Φ200 280 60 18 6 YDC 5500



7. YJM15-QYM Stress End Anchor System Technical Data:
 

Anchor Model The Number of PC Strand Anchor Head/Plate Corrugated Pipe I.D. Anchor Barrel Spiral Reinforcement Tension Jack Model
A x B x ΦD  ΦD ΦE x F ΦG x ΦH x L Cycles
 
YJM15-1 1 80x80xΦ12 Φ50 Φ45x45 70x Φ6x30 4 QYC270
YJM15-2 2 135x70xΦ58 Φ50 Φ78x45 100x Φ8x40 4 YDC 1000
YJM15-3 3 135x70xΦ58 Φ50 Φ88x48 100x Φ8x40 4 YDC 1000
YJM15-4 4 136x80xΦ62 Φ55 Φ98x48 130x Φ10x40 4 YDC 1000
YJM15-5 5 146x80xΦ62 Φ55 Φ103x48 140x Φ10x50 4 YDC 1100
YJM15-6 6 162x100xΦ78 Φ70 Φ117x48 160x Φ12x50 4 YDC 1500
YJM15-7 7 162x100xΦ78 Φ70 Φ117x50 160x Φ12x50 4 YDC 1500
YJM15-8 8 176x120xΦ88 Φ80 Φ127x50 170x Φ14x50 5 YDC 2000
YJM15-9 9 183x120xΦ90 Φ80 Φ137x50 180x Φ14x50 5 YDC 2000
YJM15-10 10 210x120xΦ100 Φ90 Φ147x50 210x Φ14x60 5 YDC 2500
YJM15-11 11 210x140xΦ100 Φ90 Φ157x50 210x Φ14x60 5 YDC 2500
YJM15-12 12 210x140xΦ100 Φ90 Φ157x50 210x Φ14x60 5 YDC 2500
YJM15-13 13 210x140xΦ100 Φ90 Φ157x55 210x Φ14x60 5 YDC 3000
YJM15-14 14 234x160xΦ100 Φ90 Φ167x60 230x Φ16x60 5 YDC 3000
YJM15-15 15 234x160xΦ100 Φ90 Φ167x60 230x Φ16x60 5 YDC 3500
YJM15-16 16 244x180xΦ100 Φ90 Φ177x60 230x Φ16x60 5 YDC 3500
YJM15-17 17 250x180xΦ100 Φ90 Φ187x65 230x Φ16x60 5 YDC 3500
YJM15-18 18 265x200xΦ110 Φ100 Φ187x65 250x Φ16x60 5 YDC 4000
YJM15-19 19 265x200xΦ110 Φ100 Φ187x65 250x Φ16x60 6 YDC 4000
YJM15-20/21/22 20/21/22 310x240xΦ130 Φ120 Φ215x70 300x Φ18x60 6 YDC 4600
YJM15-23 23 310x240xΦ140 Φ130 Φ217x70 300x Φ22x60 6 YDC 5000
YJM15-25/26/27 25/26/27 350x290xΦ140 Φ130 Φ260x90 310x Φ22x60 7 YDC 6500
YJM15-30/31 30/31 370x290xΦ150 Φ140 Φ290x105 400x Φ22x60 8 YDC 6500
YJM15-34/37 34/37 465x340xΦ170 Φ160 Φ320x112 450x Φ22x60 8 YDC 8000
YJM15-43/44 43/44 500x450xΦ170 Φ160 Φ345x130 470x Φ22x60 8 YDC 10000
YJM15-54/55 54/55 500x510xΦ170 Φ160 Φ380x160 520x Φ24x61 8 YDC 12000
 

Welcome to your inquity and visting!
Mobile  Phone No.: +8613673713569
Jason Wang


Pictures for QC in Quality Checking Department(Strict Quality Controlling)



Further Information for Complete Anchor System:

Wedge

Wedge is the key part of anchorage system, which is made by high-class alloy steel 20CrMnTi. Its form is divided into two-chip and three-chip. The system apply to the two-chip YJM15-J, it can be used for ring anchorage, flat anchorage, but also used for porous coupler.

Anchorage ring


Anchor ring is the key part of bearing the Prestressing tension. The ring anchorage is made by 45# high-quality carbon construction steel, and the flat anchorage is made by 40Cr steel. It includes the ring anchorage head and flat anchorage head.


Bearing plate


Bearing plate is the key component, which transfer the load from anchorage ring to concrete under anchor. The method of transfer and distribution of stress affect the anti-cracking and load capacity of concrete.

Bursting reinforcement

The bursting reinforcement used for distributing the concrete. For prevent concrete from crazing, and use the bursting reinforcement for strengthening tendons.


Metal Bellows(mental ducts). And we have metal bellows moulding machine and flat pipe machine.


Metal bellows used for the post-tensioning prestress concrete structure or constructive pore-forming. It can be divided into ring and flat by the section shape; Divided into standard and enhanced by radial stiffness; Divided into metal and plastic tubes by material, and the metal can be divided into galvanized and ungalvanized.

LED Emergency Bulb

Led Emergency Blub Light,Blackout Backup Emergency Bulb,Backup LED Light Bulb

Guangdong Dp Co., Ltd. , https://www.dp-led.com