Rolling bearing warehouse management
Deluxe chandeliers can give your home a more noble feeling.
Most of our luxury chandeliers are made of aluminum as the main body and acrylic as the accessories. The whole lamp is basically made of these two materials. The crystal clear acrylic sets off the beauty of the lamp, and the led reflected from the light source makes the whole lamp body more beautiful.
Luxury Pendant Light,Luxury Chandelier,Luxury Pendant Lamp,Deluxe Pendant Light JINGYING , https://www.jingyinglight.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Rolling bearing warehouse management Rolling bearing warehouse management
The storage room should be boring and ventilated; it can block the direct injection of sunlight and the rain, snow and dust. The indoor temperature is usually kept at 10~20 °C; the maximum should not exceed 30 °C; the minimum should not be lower than 5 °C; The relative humidity does not exceed 60%, and the indoors must not be stored together with harmful substances such as acids, alkalis, chemicals, and chemical raw materials. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
When the bearing is in storage; first check the storage skills. Check the bearing outer packaging and inner packaging for damage, the marking on the bearing packaging and the product packing list, product certificate, and bearing storage receipt. Product name, code, quantity, date of manufacture, name of the manufacturer (or trademark); whether it is common with the actual product status, whether the appearance of the product has rust or other defects; the product should be rejected; and immediately shipped Units to contact; discuss ways to deal with these problems.
When inspecting the appearance of the bearing product; it should be worn with a glove or a wax pad; avoid touching the bearing directly with the finger.
When the bearing is stored in the warehouse; the batch of packed bearings can be stacked and stored; the bottom should be properly raised; for ventilation and avoid moisture. Small, small bearings; can also be placed on the shelf together with the packaging. The outer wall is separated from some; to avoid strong moisture entering the bearing package. Large bearings and some thin-walled bearings cannot be placed upright; the package should be laid flat; the entire bearing is subjected to support.
The bearing is in storage time; it should be checked once (usually 6 months; wet and hot area can be 3 months). Firstly, look at the outer and inner packaging of the bearing and the oil seal, rust prevention condition, damage or deformation of the actual product appearance. If damage, deformation, or bearing storage period is found to have exceeded the regular time; these bearings should be taken out in time; or the packaging should be replaced; or the bearings should be re-cleaned, derusted and sealed with oil seals, or other disposal methods should be adopted.
Recommend to friends comments close window Bearing related knowledge Discriminant specification for NTN imported bearings
NSK imported bearings, oil film smooth handling skills, six bearing specifications, the bearing of the bearing, the reason for the oscillation of the bearing and its damping method
This article links to http://
Please indicate the bearing network http://
Previous:Detection of cooperation between NSK bearing and shaft Next: Development and vision of ceramic bearings and ceramic ball bearings