Strict ten major points of the acceptance of the initiative decoration mid-term
Construction acceptance socket cement TV decoration interior decoration decoration design bathroom ceiling material bathroom waterproof bathroom ceiling bathroom door bathroom design
LEDER technology`s vinyl pool light is independent research and development of private mold products, exquisite, small lamp body, flexible application.Moreover,the materials of Vinyl Pool Lights are generally stainless steel outer panel and aluminum lamp body, which has the advantages of strong corrosion resistance and strong impact resistance.
Vinyl Pool Lights can emit a variety of colors, gorgeous and colorful, and can better illuminate under water. Meanwhile,Vinyl Pool Light has the characteristics of energy saving, high light efficiency, rich colors and long life. LEDER technology`s vinyl pool light has good waterproof effect.This vinyl pool light has a wide selection of light colors, protection rating: IP67, and can be used up to 1m underwater.The main surface can withstand pressure up to 300KG. The lamp body adopts stainless steel surface, which has corrosion resistance, high temperature resistance, never change color, and is really durable.
Features:
• Competitive Prices
• Suitable for outdoors and underwater
• Easy Reliable Installation
• Energy saving save electricity
• Contracted design
• Color temperature :3000k-6000K
• Super waterproof performance
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
LEDER technology`s vinyl pool light can be used in gardens, swimming pools, Bridges and other outdoor places.Vinyl Pool Light is a lamp installed under the water, with a small and delicate appearance and beautiful appearance.
We have rich production experience in lighting .Except Indoor Lighting product, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light & LED Bollard Light as so on .
LED Light, Swimming Pool, Fishing Light,Vinyl Pool Light JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.ledlightoutdoor.com
First, the waterproof layer should extend from the ground to the wall, 250mm above the ground. The height of the waterproof layer on the bathroom wall should not be less than 1800mm.
2. After the completion of the waterproofing project, a 24-hour storage test must be done.
Third, the power cord and the telephone line or network cable must not penetrate the same line tube. The horizontal distance between the power cord and socket and TV line and socket should not be less than 500mm.
4. A waterproof socket shall be installed in the toilet room and the switch shall be installed on the wall on the open side of the door.
5. Lines laid on the chisel wall or on the ceiling must be equipped with a sheath pipe. It is forbidden to directly bury the conductor in the plaster layer. The conductor shall not have joints and kinks in the pipe, and there shall be no exposed conductor in the ceiling.
Sixth, the general socket uses 2.5mm2 section and must design the grounding line, the air conditioner, the water heater and so on uses 4.0mm2 section.
Seventh, weak electricity: The telephone may choose to use 4 cores, the computer line uses 8 cores and 5 classes of lines, and the audio line recommends according to the sound equipment merchant to suggest to choose, the enthusiast must use the special high-grade line.
Eight, the indoor gas pipeline should be based on the main application. Gas pipelines shall be laid along the walls of non-combustible materials. When meeting with other pipelines, the following requirements shall be met:
(1) When laying horizontally parallel, the net distance should not be less than 150mm;
(2) When laying in parallel vertical direction, the net distance should not be less than 100mm, and it should be located on the outside of other pipes;
(3) When cross-laying, the net distance should not be less than 50mm.
9. Before tiling, the walls of the bathroom and the kitchen must be treated with a nap. That is, using cement > cement stuck to the wall to form a burr.
X. Carpentry Project:
1, all the plates are firm and no shaking.
2. The surface of all wood must not have dead knots, wormholes and cracks, and no skin. The hand feels smooth and delicate.