Structural characteristics and application of high temperature molten salt pump

YHGY65-250 molten salt pump is based on the high temperature pump and submerged pump, with reference to the structure of the same type of products abroad, combined with the characteristics of high temperature molten salt developed molten salt pump products for melt Salt circulation system or molten salt heat exchanger system dedicated high temperature pump. Now to introduce the structure and application of high temperature molten salt pump. High temperature molten salt pump First, high temperature molten salt pump structural features 1. The product is vertical, single (or two) single suction pump. 2. Under liquid insertion depth of up to 2m, do not use the shaft structure. 3. Bushing and sleeve are made of wear-resistant high temperature materials, since the washing lubrication. 4. The use of the liquid part and the support part of the full approach, compact, more effective in reducing thermal deformation. 5. The pump fluid under the part of high temperature resistant carbon steel or stainless steel, all connectors are used to prevent loose lock. 6. The upper part of the liquid is designed as a packing seal. 7. The temperature below the floor must be above the temperature at which the medium crystallizes. 8. The liquid part of the ball bearings, grease lubrication, using water-cooled jacket for cooling. 9. Gasket with high temperature rubber asbestos board. 10. Bottom plate design is round or square, which is conducive to the tank seal, combined with the actual use of the user. 11. The use of flexible coupling. Second, the application of high temperature molten salt pump salt bath salt bath for replacement, alumina tube melting out, caustic soda alkali condensation, phthalic anhydride, maleic anhydride, Jun anhydride, melamine, acrylic acid and fat, Topsoft acid, grate Sebacic acid sesame oil, solar thermal storage, molten salt seawater refining magnesium, base oil smelting, pyrolysis reaction and other industries. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)

Bearing Unit and Pillow Block

Bearing Unit And Pillow Block ,Pillow Block Bearing,Split Pillow Block Bearing,Heavy Duty Pillow Block Bearings

NINGBO DEMY (D&M) BEARINGS CO.,LTD , https://www.demybmtbearing.com