The overall design of the renovation program

Finding a designer is really not an easy task. But even if you get it right, there is no deep communication with it, and the effect will be greatly reduced. Therefore, the communication between each other is very important. In general, you must at least communicate with the designer in the following areas:

1, roughly the decoration costs, which allows designers to control the design of the program within the cost, not too high cost standards, will not be lower than your grade requirements for decoration.

2, the status of the house. The most important thing is to provide the designer with the original floor plan of your house. If there are conditions, it is better to provide information such as housing defect records and photos.

3, family members structure, living habits, consider in advance the need to meet the functional requirements.

4. Individual opinions on the selection of main materials and electrical equipment.

5, the style of decoration, lighting design, color view.

6. There should also be a general understanding of the designer's working procedures, plans, and fees.

In the process of communication, you can tell your designer your own vague and immature ideas. It does not require that you be very specific. Because relatively speaking, you will want to learn better ideas from the designers, which is conducive to give full play to the role of the designer.

The details also need to listen to the designer's opinions. For example, monochrome or striped tiles are used in bathrooms and kitchens, leaving lines of water easily. Experienced designers will suggest that you pick tiles with a vertical pattern. In this way, even if the watermark is not cleaned in time, it does not look dirty. How much can you know with similar experience? A professional designer can help you with this idea. Therefore, it is very important to respect the opinions of the designers in the communication process and seek common ground while reserving differences.

Villa design entrance decoration house decoration design home decoration electrical lighting decoration style bathroom design bathroom tile color bathroom tile kitchen tile

CBN Grinding Wheels

CBN is a man-made Superabrasive that outperforms Diamond when used for Ferrous grinding operations.

CBN derives its name from its chemical makeup, of the cubic form of boron nitride (CBN). It has a very desirable characteristic that is sought after when working with difficult to grind (DTG) materials.

Due to its high thermal stability and chemical resistance, the CBN grinding wheel is most suitable for grinding hard ferrous materials, hardened steel, bearing steel, nickel based alloys. machining ferrous materials.

CBN Grinding Wheels are used to sharpen, cut, or remove metal from hard surfaces. Use these wheels when you need a good consistent finish.

Most notably CBN wheels are used to cut HSS metals, like wood tools, blades, bits, and cutters. This type of steel is better than the older high-carbon steel because it can withstand higher temperatures. When you`re tools become dull over time from use, a CBN wheel will bring them back to its sharp use.

Kemei produce CBN(cubic boron nitride)grinding wheels, which can be resin bonded CBN wheel, metal bonded CBN wheels and electroplated Diamond Grinding Wheels. For same steel parts, you can choose all three types CBN wheels, but there still some difference, if you need more information and the best solutions ,please contact us.

Cbn Grinding Wheels,Cbn Cut Off Wheel,Diamond And Cbn Wheels,Electroplated Cbn Grinding Wheels

Henan Jinlun Superhard Material Co., Ltd , https://www.kmgrindingwheels.com