Three must-know lamps selection
Everyone has a different understanding of the family. How can one decorate the perfect home with limited funds? In home renovation, many owners are concerned about the cost of renovation. Therefore, before the renovation, we must plan well. Only good planning can reduce the cost. First, identify the appearance of the lamp 1. Marking of luminaires When purchasing luminaires, you should first check the markings on the luminaires, such as trademarks, models, rated voltage, and rated power, and determine whether they meet their own requirements for use. Marking safety is a basic requirement in the safety performance of lamps and lanterns, among which the rated power is particularly important. For example, for a lamp designed for 40W, since the rated power is not marked, the user is likely to install a 60W or 100W lamp, which may cause deformation of the housing and insulation damage. It may even cause electric shock and may cause fire. 2, from the protection against electric shock identification should pay attention to protection against electric shock, lighting power, the person must touch no live parts, there will be no risk of electric shock. If you buy incandescent lamps (such as chandeliers, wall lamps), put the light bulbs on, in the absence of electricity, such as the use of small finger touched live parts, the protection against electric shock is basically consistent. Causes the lamp to prevent the electric shock to be inconsistent, generally uses the lamp socket that the lamp that does not meet the requirements or the lamp live parts does not cover and so on protects against the electric shock protection measures. In addition, the standard stipulates that the minimum cross section of the wire used in the luminaire is 0.5mm2, and some manufacturers reduce the cost. The cross-sectional area of ​​the wire used in the product is only 0.5mm2, so that the wire can be charred and the insulation layer burns out. Short circuit, dangerous. The method of identification is: When buying, you can look at the marks printed on the insulating layer outside the wires on the lamps. The cross-sectional area of ​​the wires should be at least 0.5mm2. Second, from the lighting structure identification 1. There should be no sharp edges on the entrances and exits of the metal pipes through which the wires pass, so as not to cut the wires and cause the metal parts to become live, causing electric shock. 2, table lamps, floor lamps and other portable lamps in the power cord inlet should be a wire holder, its role is to prevent the power cord push back to touch the heating element, the wire is too hot to cause the insulating layer to melt, the exposed wire and metal shell contact, shell Charged and lead to electric shock. Third, the use of accessories from the lamps to identify If electronic ballasts are used in luminaires, luminaires equipped with anomalously protected electronic ballasts shall be selected. The so-called anomalous protection refers to the protection given when an abnormal state occurs in the fluorescent circuit, so that the electronic ballasts The device still works. Lighting brand entrance decoration home decoration decoration design home floor lamp decoration home Top shower
Top shower is mounted on wall holding by Shower Arm or [7" type pipe, above the head. It has around and square, 2 popular types Top shower. Material of top shower can use engineer ABS with chrome plated, Stainless steel and Brass with chrome finish. Size: 4", 6", 8", 10", 12", 16", 20".
With the large showerhead and RainAir spray mode, you can enjoy an especially intense shower experience.
Top Shower,Top Rated Shower Head,Shower Heads,Rain Shower Head SHENZHEN KING OF SUN INDUSTRY CO.,LTD , https://www.handybasinfaucet.com