Vibrating screen use and maintenance
The vibrating screen should be started without the material on the screen surface. Try to avoid the start of the material, and the sieve machine can be fed after it is running smoothly. Before the shutdown, the feed should be stopped first, and then the sieve material should be removed before stopping. During the working process, the operation of the sieve machine should be observed frequently. If the movement is abnormal or abnormal, it should be stopped and checked in time to find out the cause and eliminate the fault. The vibrator bearing is lubricated with No. 2 lithium base grease. Under normal circumstances, the grease should be filled once every two months. The filling amount should not be too much, otherwise it will cause the bearing to overheat. After using the vibrator for 6 months, check the grease. If it is found to be dry or has a hard block, it should be cleaned and replaced with new grease. The bearing should be cleaned and inspected once a year. Aluminium Panel,Aluminum Roof Panels,Aluminum Composite Panel,Aluminium Composite Panel Price SHAOXING YOTO IMPORT&EXPORT CO., LTD , https://www.sxyoto.com