6063 Series Extruded Aluminium Profile / Aluminium Extrusion for Windows and Doors
1. Description: Aluminum profile
2. Alloy temper: 6063-T6; 5083-H112; 6061-T6/T651; 6082-T6/T651; 6351-T6; 7075-T6
3. Standard: EN755, ASTMB221, DIN Standard
4. Surface treatment: Mill finish; Anodizing; Powder coated, Brushed.
5. Application: Car; Aerospace; Ship; Armarium; Industrial equipment; And etc.
6. Advantage:
1) Pure 99.7% aluminum materials without any scrap used
2) OEM welcome, we can design and cut die to meet customer's special demand
3) Wonderful surface treatment, we can meet customers required on surface
4) Strictly quality control process assured higher quality.
5)Hard alloy longer life span
6) Packing safety and convenient.
Â
Description
Aluminum/Aluminium industrial extrusion profile for container floor
SGS TEST APPROVAL
Alloy/Temper
6061-T6/6063-T6; 6082-T6/6351-T6; 7075/7005-T6
SGS TEST APPROVAL
Surface treatment
Mill finishes;Anodized; Powder coated;Wooden grain, Machine/Acid polished and etc
SGS TEST APPROVAL
Standard apply
EN755;DIN;ASTMB221;GB5237-2008 and etc.
SGS TEST APPROVAL
Price
SMM/LME Primary aluminum price + the most competitive conversion cost
SGS TEST APPROVAL
Mould policy
Each item purchased volume get to 3tons , refund mould payment
SGS TEST APPROVAL
Delivery timetable
sample: within 20 days; order: within 20 days
SGS TEST APPROVAL
Payment term
20% deposit, the balance pay against B/L copy within 7 days
SGS TEST APPROVAL
Packing standard
Protected film and pearl cotton inside and shrink film outside
SGS TEST APPROVAL
Guarantee term
If the shipped products can not meet required, the total order amount will be refund back without delay, or arrange new replacement cargoes instead.
SGS TEST APPROVAL
Below to introduce the classification of aluminium alloy profiles:
A, according to use can be divided into the following categories:
1. The doors and Windows of building doors and Windows aluminum (two) is divided into doors and Windows and curtain wall;
2. CPU radiator dedicated radiator aluminum;
3. Aluminum alloy aluminum shelves, they differ in that the different section shape, but are produced by melt extrusion;
4. Industrial aluminum profile: mainly used in automatic machinery and equipment, sealing cover skeleton and companies according to their own custom mould machinery and equipment requirements, such as assembly line conveyor belt, lifting machine, glue machine, testing equipment, etc., and mostly in the clean room use electronic machinery industry.
Second, according to the alloy composition classification:
Can be divided into 1024, 2011, 6063, 6061, 6082, 7075, such as aluminum alloy nameplate, six of them are the most common. Ratio of different brands differ in various metal composition is different, in addition to the commonly used aluminum doors and Windows, such as 60 series, 70 series, 80 series, 90 series, curtain wall series and so on architectural aluminum, industrial aluminum profiles with no clear model distinguish, most plants are the actual drawing processing according to the customer.
Three, classified according to the requirements of surface treatment:
1. Anodized aluminum;
2. Electro-deposition aluminium;
3. Powder coating aluminum;
4. The wood grain transfer printing aluminum;
5. Wrot aluminum.
Introduction to edit
Aluminium alloy profile is the most widely used in industry of non-ferrous metal structural materials, in aviation, aerospace, automotive, machinery manufacturing, shipbuilding, construction, decoration. And have been extensively applied in chemical industry. As the science and technology in recent years, as well as the rapid development of industrial economy, the demand for aluminum alloy welding structure is increasing, also make the weldability of aluminum alloy and research. Aluminum alloy is widely used to promote the development of aluminum alloy welding technology, at the same time, the development of welding technology and expand the application field of aluminum alloy, thus the welding technology of aluminum alloy is becoming one of the hot spot of research.
Performance of the editor
The density of pure aluminum (rho = 2.7 g/cm3), is about 1/3 of the iron, low melting point (660 ºC), aluminum is face-centered cubic structure, therefore, has the very high plasticity (delta: 32 ~ 40%, and bits of: 70 ~ 90%), easy to machining, can be made into all kinds of shapes, plates, corrosion resistant performance is good. But the strength of pure aluminium is very low, annealing state sigma b value is about 8 KGF/was, therefore, not as a structural material. Through the long-term production practice and scientific experiment, people gradually to add alloy elements and using the method of heat treatment to strengthen aluminum, it's got a series of aluminum alloy. Add some elements to form the alloy while maintaining the advantages of pure aluminum light can also has high strength, sigma b value can reach 24 ~ 60 KGF/was respectively. So that its "strength" (the ratio of intensity and the proportion of sigma b/rho) is better than a lot of alloy steel, become the ideal structural material, widely used in machinery manufacturing, transportation, machinery and aviation industry, the aircraft fuselage, skin, such as compressor with aluminum alloy manufacture, in order to reduce weight. The welding of aluminum alloy instead of steel material, the structure can reduce more than 50% in weight.
The classification of aluminum alloy profiles of aluminum alloy profile is introduced
Below to introduce the classification of aluminium alloy profiles:
A, according to use can be divided into the following categories:
1. The doors and Windows of building doors and Windows aluminum (two) is divided into doors and Windows and curtain wall;
2. CPU radiator dedicated radiator aluminum;
3. Aluminum alloy aluminum shelves, they differ in that the different section shape, but are produced by melt extrusion;
4. Industrial aluminum profile: mainly used in automatic machinery and equipment, sealing cover skeleton and companies according to their own custom mould machinery and equipment requirements, such as assembly line conveyor belt, lifting machine, glue machine, testing equipment, etc., and mostly in the clean room use electronic machinery industry.
Second, according to the alloy composition classification:
Can be divided into 1024, 2011, 6063, 6061, 6082, 7075, such as aluminum alloy nameplate, six of them are the most common. Ratio of different brands differ in various metal composition is different, in addition to the commonly used aluminum doors and Windows, such as 60 series, 70 series, 80 series, 90 series, curtain wall series and so on architectural aluminum, industrial aluminum profiles with no clear model distinguish, most plants are the actual drawing processing according to the customer.
Three, classified according to the requirements of surface treatment:
1. Anodized aluminum;
2. Electro-deposition aluminium;
3. Powder coating aluminum;
4. The wood grain transfer printing aluminum;
5. Wrot aluminum.
Introduction to edit
Aluminium alloy profile is the most widely used in industry of non-ferrous metal structural materials, in aviation, aerospace, automotive, machinery manufacturing, shipbuilding, construction, decoration. And have been extensively applied in chemical industry. As the science and technology in recent years, as well as the rapid development of industrial economy, the demand for aluminum alloy welding structure is increasing, also make the weldability of aluminum alloy and research. Aluminum alloy is widely used to promote the development of aluminum alloy welding technology, at the same time, the development of welding technology and expand the application field of aluminum alloy, thus the welding technology of aluminum alloy is becoming one of the hot spot of research.
Performance of the editor
The density of pure aluminum (rho = 2.7 g/cm3), is about 1/3 of the iron, low melting point (660 ºC), aluminum is face-centered cubic structure, therefore, has the very high plasticity (delta: 32 ~ 40%, and bits of: 70 ~ 90%), easy to machining, can be made into all kinds of shapes, plates, corrosion resistant performance is good. But the strength of pure aluminium is very low, annealing state sigma b value is about 8 KGF/was, therefore, not as a structural material. Through the long-term production practice and scientific experiment, people gradually to add alloy elements and using the method of heat treatment to strengthen aluminum, it's got a series of aluminum alloy. Add some elements to form the alloy while maintaining the advantages of pure aluminum light can also has high strength, sigma b value can reach 24 ~ 60 KGF/was respectively. So that its "strength" (the ratio of intensity and the proportion of sigma b/rho) is better than a lot of alloy steel, become the ideal structural material, widely used in machinery manufacturing, transportation, machinery and aviation industry, the aircraft fuselage, skin, such as compressor with aluminum alloy manufacture, in order to reduce weight. The welding of aluminum alloy instead of steel material, the structure can reduce more than 50% in weight.Â
RELIANCE ALU PRODUCTION RANGE
ALLOY
6060
6063
6061
6082
6005A
6351
5083
5052
7075
2024
2014
TEMPER
T5/T6
T5/T6
T6/T6511
T6/T6511
T6/T6511
T6/T6511
O/H112
O/H112
T6/T6511
T4/T6
T4/T6
STANDARD
APPLYEN755/DIN
GB5237-2008
EN755-3/DIN
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574
CERTIFICATION
SGS /TUV - ISO9001:2008
SURFACE
TREATMENTMill finish
Clearn anodized
Matt anodized
Chemcial polished
Machinery Polish
Powder coating
Wood grain
Electrophoresis
Brushed
PVDF Coating
3D Wooden Paint
COLOR
Clearn / Matt
AnodizedSilver, bronze, champagne, titanium, nickel, golden yellow, etc.
The anodized film thickness is over 10um
Chemical/Machinery
PolishedSilver, bronze, champagne, titanium, nickel, golden yellow, etc.
The anodized film thickness is over 5um
Powder coating
White, Black, Grey,Green, Blue, Yellow , Red and etc.
The powder coated thickness is over80um.
Wood Grain
1.USA 3M and Italian MENPHIS transfer printing paper.
2. AKZO NOBEL INTERPON D1010(10 years warranty): Australia ceder, Bush cherry, Chest nut, Jarrah I, Jarrah II, Western red ceder, etc. 3. AKZO NOBEL INTERPON D34(5 years warranty): Bush wood, Western red, Jarrah, Snow gum, etc.
Electrophoresis
Silver, nickel, golden yellow, black, champagne, etc
Brushed
Silver, nickel, golden yellow, black, bronze, etc
PVDF Coating
White, Black, Grey,Green, Blue, Yellow , Red and etc.
3D Wooden Paint
Solid wood handle 3D wooden paint, White, Black, Grey,Green, Blue, Yellow , Red and etc.
DEEP PROCESSING
90degree, 45degree and any degree Cutting, punching, drilling, bending, weld, mill, CNC, etc.
Window/door/fenster
Sliding, awinging, casement, thermobreak window/door
1. Description: Aluminum profile
2. Alloy temper: 6063-T6; 5083-H112; 6061-T6/T651; 6082-T6/T651; 6351-T6; 7075-T6
3. Standard: EN755, ASTMB221, DIN Standard
4. Surface treatment: Mill finish; Anodizing; Powder coated, Brushed.
5. Application: Car; Aerospace; Ship; Armarium; Industrial equipment; And etc.
6. Advantage:
1) Pure 99.7% aluminum materials without any scrap used
2) OEM welcome, we can design and cut die to meet customer's special demand
3) Wonderful surface treatment, we can meet customers required on surface
4) Strictly quality control process assured higher quality.
5)Hard alloy longer life span
6) Packing safety and convenient.
Â
Description
Aluminum/Aluminium industrial extrusion profile for container floor
SGS TEST APPROVAL
Alloy/Temper
6061-T6/6063-T6; 6082-T6/6351-T6; 7075/7005-T6
SGS TEST APPROVAL
Surface treatment
Mill finishes;Anodized; Powder coated;Wooden grain, Machine/Acid polished and etc
SGS TEST APPROVAL
Standard apply
EN755;DIN;ASTMB221;GB5237-2008 and etc.
SGS TEST APPROVAL
Price
SMM/LME Primary aluminum price + the most competitive conversion cost
SGS TEST APPROVAL
Mould policy
Each item purchased volume get to 3tons , refund mould payment
SGS TEST APPROVAL
Delivery timetable
sample: within 20 days; order: within 20 days
SGS TEST APPROVAL
Payment term
20% deposit, the balance pay against B/L copy within 7 days
SGS TEST APPROVAL
Packing standard
Protected film and pearl cotton inside and shrink film outside
SGS TEST APPROVAL
Guarantee term
If the shipped products can not meet required, the total order amount will be refund back without delay, or arrange new replacement cargoes instead.
SGS TEST APPROVAL
Below to introduce the classification of aluminium alloy profiles:
A, according to use can be divided into the following categories:
1. The doors and Windows of building doors and Windows aluminum (two) is divided into doors and Windows and curtain wall;
2. CPU radiator dedicated radiator aluminum;
3. Aluminum alloy aluminum shelves, they differ in that the different section shape, but are produced by melt extrusion;
4. Industrial aluminum profile: mainly used in automatic machinery and equipment, sealing cover skeleton and companies according to their own custom mould machinery and equipment requirements, such as assembly line conveyor belt, lifting machine, glue machine, testing equipment, etc., and mostly in the clean room use electronic machinery industry.
Second, according to the alloy composition classification:
Can be divided into 1024, 2011, 6063, 6061, 6082, 7075, such as aluminum alloy nameplate, six of them are the most common. Ratio of different brands differ in various metal composition is different, in addition to the commonly used aluminum doors and Windows, such as 60 series, 70 series, 80 series, 90 series, curtain wall series and so on architectural aluminum, industrial aluminum profiles with no clear model distinguish, most plants are the actual drawing processing according to the customer.
Three, classified according to the requirements of surface treatment:
1. Anodized aluminum;
2. Electro-deposition aluminium;
3. Powder coating aluminum;
4. The wood grain transfer printing aluminum;
5. Wrot aluminum.
Introduction to edit
Aluminium alloy profile is the most widely used in industry of non-ferrous metal structural materials, in aviation, aerospace, automotive, machinery manufacturing, shipbuilding, construction, decoration. And have been extensively applied in chemical industry. As the science and technology in recent years, as well as the rapid development of industrial economy, the demand for aluminum alloy welding structure is increasing, also make the weldability of aluminum alloy and research. Aluminum alloy is widely used to promote the development of aluminum alloy welding technology, at the same time, the development of welding technology and expand the application field of aluminum alloy, thus the welding technology of aluminum alloy is becoming one of the hot spot of research.
Performance of the editor
The density of pure aluminum (rho = 2.7 g/cm3), is about 1/3 of the iron, low melting point (660 ºC), aluminum is face-centered cubic structure, therefore, has the very high plasticity (delta: 32 ~ 40%, and bits of: 70 ~ 90%), easy to machining, can be made into all kinds of shapes, plates, corrosion resistant performance is good. But the strength of pure aluminium is very low, annealing state sigma b value is about 8 KGF/was, therefore, not as a structural material. Through the long-term production practice and scientific experiment, people gradually to add alloy elements and using the method of heat treatment to strengthen aluminum, it's got a series of aluminum alloy. Add some elements to form the alloy while maintaining the advantages of pure aluminum light can also has high strength, sigma b value can reach 24 ~ 60 KGF/was respectively. So that its "strength" (the ratio of intensity and the proportion of sigma b/rho) is better than a lot of alloy steel, become the ideal structural material, widely used in machinery manufacturing, transportation, machinery and aviation industry, the aircraft fuselage, skin, such as compressor with aluminum alloy manufacture, in order to reduce weight. The welding of aluminum alloy instead of steel material, the structure can reduce more than 50% in weight.
The classification of aluminum alloy profiles of aluminum alloy profile is introduced
Below to introduce the classification of aluminium alloy profiles:
A, according to use can be divided into the following categories:
1. The doors and Windows of building doors and Windows aluminum (two) is divided into doors and Windows and curtain wall;
2. CPU radiator dedicated radiator aluminum;
3. Aluminum alloy aluminum shelves, they differ in that the different section shape, but are produced by melt extrusion;
4. Industrial aluminum profile: mainly used in automatic machinery and equipment, sealing cover skeleton and companies according to their own custom mould machinery and equipment requirements, such as assembly line conveyor belt, lifting machine, glue machine, testing equipment, etc., and mostly in the clean room use electronic machinery industry.
Second, according to the alloy composition classification:
Can be divided into 1024, 2011, 6063, 6061, 6082, 7075, such as aluminum alloy nameplate, six of them are the most common. Ratio of different brands differ in various metal composition is different, in addition to the commonly used aluminum doors and Windows, such as 60 series, 70 series, 80 series, 90 series, curtain wall series and so on architectural aluminum, industrial aluminum profiles with no clear model distinguish, most plants are the actual drawing processing according to the customer.
Three, classified according to the requirements of surface treatment:
1. Anodized aluminum;
2. Electro-deposition aluminium;
3. Powder coating aluminum;
4. The wood grain transfer printing aluminum;
5. Wrot aluminum.
Introduction to edit
Aluminium alloy profile is the most widely used in industry of non-ferrous metal structural materials, in aviation, aerospace, automotive, machinery manufacturing, shipbuilding, construction, decoration. And have been extensively applied in chemical industry. As the science and technology in recent years, as well as the rapid development of industrial economy, the demand for aluminum alloy welding structure is increasing, also make the weldability of aluminum alloy and research. Aluminum alloy is widely used to promote the development of aluminum alloy welding technology, at the same time, the development of welding technology and expand the application field of aluminum alloy, thus the welding technology of aluminum alloy is becoming one of the hot spot of research.
Performance of the editor
The density of pure aluminum (rho = 2.7 g/cm3), is about 1/3 of the iron, low melting point (660 ºC), aluminum is face-centered cubic structure, therefore, has the very high plasticity (delta: 32 ~ 40%, and bits of: 70 ~ 90%), easy to machining, can be made into all kinds of shapes, plates, corrosion resistant performance is good. But the strength of pure aluminium is very low, annealing state sigma b value is about 8 KGF/was, therefore, not as a structural material. Through the long-term production practice and scientific experiment, people gradually to add alloy elements and using the method of heat treatment to strengthen aluminum, it's got a series of aluminum alloy. Add some elements to form the alloy while maintaining the advantages of pure aluminum light can also has high strength, sigma b value can reach 24 ~ 60 KGF/was respectively. So that its "strength" (the ratio of intensity and the proportion of sigma b/rho) is better than a lot of alloy steel, become the ideal structural material, widely used in machinery manufacturing, transportation, machinery and aviation industry, the aircraft fuselage, skin, such as compressor with aluminum alloy manufacture, in order to reduce weight. The welding of aluminum alloy instead of steel material, the structure can reduce more than 50% in weight.Â
RELIANCE ALU PRODUCTION RANGE
ALLOY
6060
6063
6061
6082
6005A
6351
5083
5052
7075
2024
2014
TEMPER
T5/T6
T5/T6
T6/T6511
T6/T6511
T6/T6511
T6/T6511
O/H112
O/H112
T6/T6511
T4/T6
T4/T6
STANDARD
APPLYEN755/DIN
GB5237-2008
EN755-3/DIN
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574GB6892-2008
ASTMB221
AMS-QQA-4574
CERTIFICATION
SGS /TUV - ISO9001:2008
SURFACE
TREATMENTMill finish
Clearn anodized
Matt anodized
Chemcial polished
Machinery Polish
Powder coating
Wood grain
Electrophoresis
Brushed
PVDF Coating
3D Wooden Paint
COLOR
Clearn / Matt
AnodizedSilver, bronze, champagne, titanium, nickel, golden yellow, etc.
The anodized film thickness is over 10um
Chemical/Machinery
PolishedSilver, bronze, champagne, titanium, nickel, golden yellow, etc.
The anodized film thickness is over 5um
Powder coating
White, Black, Grey,Green, Blue, Yellow , Red and etc.
The powder coated thickness is over80um.
Wood Grain
1.USA 3M and Italian MENPHIS transfer printing paper.
2. AKZO NOBEL INTERPON D1010(10 years warranty): Australia ceder, Bush cherry, Chest nut, Jarrah I, Jarrah II, Western red ceder, etc. 3. AKZO NOBEL INTERPON D34(5 years warranty): Bush wood, Western red, Jarrah, Snow gum, etc.
Electrophoresis
Silver, nickel, golden yellow, black, champagne, etc
Brushed
Silver, nickel, golden yellow, black, bronze, etc
PVDF Coating
White, Black, Grey,Green, Blue, Yellow , Red and etc.
3D Wooden Paint
Solid wood handle 3D wooden paint, White, Black, Grey,Green, Blue, Yellow , Red and etc.
DEEP PROCESSING
90degree, 45degree and any degree Cutting, punching, drilling, bending, weld, mill, CNC, etc.
Window/door/fenster
Sliding, awinging, casement, thermobreak window/door