Bamboo curtain partition installation tips
In the hot summer days, in order to withstand the hot sun, many residents hang up a variety of shade cloths, which are like the Wan Guo flag floating in the air. They are neither uniform nor beautiful and have hidden dangers. In order to standardize the messy accounts of the residents in the scenic spot, it is neat and tidy, and the uniform style of the roller blind bamboo curtain is sent to the door for installation. Let's take a look at the installation method of the bamboo curtain partition. There are several houses in the house that have been in disrepair for a long time, and the eaves are damaged, so that the bamboo curtains cannot be installed properly. The management committee deliberately re-repaired them, and completed the installation tasks with quality and quantity. The scenic area reappears in a standardized and orderly appearance. . First of all, we must figure out how wide it is. It only needs 3 fixed points to install on the wall within 1 meter. First, use a steel tape measure to measure the width and then divide the center. Use the pen to make a mark at the center and 10 cm on both sides of the pulley. Make a mark in 2 points, use a hand drill to make a small eye with a hole of 3:2, and then make a mark on the wall with the width of the curtain. Note that it should be as wide as 20cm upwards. Then use the same size as the curtain to make a mark with a hammer drill. The hole diameter should be 0:8. Put it into a plastic expansion tube and install it with a 5 cm self-tapping screw. Embedded and wall-mounted installations are justified, and the exact dimensions are the most important. 1. Simple hook test method is to nail 2 nails on the window frame or door frame, screw 2 hooks on the solid wood beam at the top of the curtain (curtain), and hang the hook on the nail. Yes. 2, the inner frame type of the top installation method: Do not hook when installing, directly put the beam on the top of the curtain (curtain) on the inner frame of the household, screw it in from the bottom of the beam (below), screw the beam to fix the screw on the fixed part of the window frame, make the beam tight Stick the top. Sewing Measuring Tape,Tailor Measuring Tape,Custom Logo Tape Measure,Tailor Measuring Soft Tape Measure Shangqiu Hengli Measuring Tools Co.,Ltd , https://www.jjmtools.com