Eight basic knowledge of disinfection cabinets


Molin sink     Supor Electric

1. The tableware should be washed and drained and then placed in a disinfection cupboard to disinfect, which can shorten the disinfection time and reduce the power consumption.

2, plastic and other non-heat-resistant tableware can not be placed in the lower heat disinfection cabinet, but should be placed in the upper ozone disinfection disinfection of low temperature disinfection cabinet, so as not to damage the tableware.

3, colored porcelain utensils into the disinfection cabinet will release harmful substances, harm human health. Because ceramic bowls, plates, jars, pots, etc., in the enamel color, its enamel, pigments contain toxic lead, cadmium and other heavy metals. Normally, these chemical elements are relatively stable, but they are easily released when exposed to high temperatures. While the sterilizer is working, the internal temperature can reach up to 200°C. Frequently placing foods in these sterilized porcelains can cause food contamination and harm to health.

4, bowls, dishes, cups and other utensils should be placed vertically on the shelf, it is best not to stack for ventilation and disinfection as soon as possible.

5. When using an ozone sterilizer, pay attention to whether the ozone generator is working properly, where the hum of a high-voltage discharge or the blue light of discharge cannot be seen, indicating that the ozone generator may malfunction and should be repaired in time.

6, disinfection cabinet should be placed in a dry and ventilated place, not less than 30 cm away from the wall.

7. Do not open the door when disinfection is not necessary so as not to affect the disinfection efficiency.

8, after the end of disinfection, if you use it after 10 minutes, the effect is better. There is a small amount of ozone odor when the door is opened. This concentration is not harmful to human health. Please rest assured.

Disinfection cabinet sink Supor electrical cabinet door

Led Vapor Tight Fixtures

The IP rating of Led Vapor Tight Fixtures is 66. It is dustproof, waterproof, anti-corrosion, and anti-UV. It can effectively prevent the lamp body from being easily oxidized and broken after exposure. The integrated design makes installation more convenient and quicker. It does not need to be installed and connected in series after the lamp body is open like the traditional three-proof light. So it can effectively shorten the construction period and reduce labor costs.


There is a respirator at one end of the lamp body, which can avoid thermal expansion and contraction when the lamp body is working, and water droplets appear on the wall of the lamp body, which affects the service life of the lamp beads.

Our LED Tri-proof Light are connected in series without the use of tools. Cylindrical design, which make cleaning more easily.

waterproof light

Weatherproof Outdoor Lights,Waterproof Light,Ip65 Led Light,Ip65 Light Fitting

SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com