Epoxy resin identification method

There are no simple, proprietary test methods for the crosslinked units in epoxy or cured epoxy resins that have already been converted. The Gibbs Indophenol test of epoxy resin for phenol is a positive reaction (due to the presence of bisphenol A). In contrast to phenolic resins, the chromic acid test of formaldehyde is a negative reaction.
When pyrolyzed below 260°C, all epoxy resins will produce acetaldehyde. The steps are: placing test pods in a pyrolysis tube, covering the filter paper with a freshly prepared 5% nitrocyanide and morpholine in water, and heating in an oil bath to 240°C. When the gas emitted by thermal cracking passes through the filter paper. Blue filter paper indicates epoxy resin.
Epoxy resins can also be identified by the method of dispensing: About 100 milligrams of resin are taken in about 10 milliliters of concentrated sulfuric acid at room temperature, followed by the addition of about 1 milliliter of concentrated nitric acid. Five minutes later, 5% aqueous sodium hydroxide solution was carefully added to the top of the solution. If bisphenol A epoxy resin was present, the cherry red color appeared at the interface between the two layers.

BMI Tape Measure

Introduction

BMI(Body Mass Index) is a person's weight in kilograms divided by the square of height in meters.

In general, BMI is an inexpensive and easy-to-perform method of screening for weight category, for example underweight, normal or healthy weight, overweight, and obesity.


About Materials and Shape of Case

The BMI calculator is ABS case, PVC coated fiberglass tape.
BMI tape measure has several kinds of case shapes-round shape, heart shape, and drip shape. Today we will introduce this round and biggest one for you.


About Language Version of Wheel Plate

This is the most popular English version.
We have Spanish version and other language versions.


About Tape Sizes

The tape both sides with 150cm, one side for male and the other side for female.
To check your waist size, the tape marked with 3 colors zones (green for healthy, orange for over weight, red for over obese)
There are 2 widths for the tapelines: 13mm and 7.5mm


About Usage

On the case, there is a wheel which can be rotate. Body height data in cm and inch marked on wheel, and weight data on the case, when we rotate the wheel, we can match the height and weight, then check the BMI arrow point to which section(there are 5 sections:underweight,healthy,overweight,obese and very obese)

For example, you are 160cm height and weight 55kgs, match them, then check the BMI arrow point to healthy.


BMI Categories

Less than 20: Underweight

From 20 to 25: HEALTHY

From 25 to 30: OVERWEIGHT

From 30 to 40: OBESE

More than 40: VERYOBESE






Spanish BMI Tape Measure,Medical BMI Measuring Tape,Body BMI Tape Measure

Wintape Measuring Tape Company , https://www.wintapetape.com