Five Conditions to Pay Attention to in Summer Construction
In summer, due to the hot weather and the dryness of the weather, renovation projects usually give people a feeling of ease and ease of construction. However, some carelessness may lead to some undesirable factors. Therefore, the following conditions must be taken into account in summer construction. First, pay attention to material stacking, storage, purchase or finished products. Semi-finished wood, wooden floor or freshly painted furniture, do not rush to be exposed to the sun under the sun exposure, should be placed in a dry and ventilated place to dry naturally, otherwise the material is not only easy to deformation, cracking, but also affect the quality of construction. Second, pay attention to the treatment of the finished base, in particular, before pasting tiles, floor tiles, and wall surfaces, do not allow the bottom layer of the veneer to be too dry. Generally, first pour water on the surface and allow it to absorb about half an hour before reusing cement mortar. Or gypsum powder bottoming to ensure that the paste is solid. Third, pay attention to the maintenance of the aftermath, has been done in the cement, 107 plastic, or cement roof after the completion of the three or five days should be put some water every day to prevent cracking. Fourth, pay attention to the rational use of chemical products. Before construction, all products should be read in detail, such as instructions for chemical products such as glues, adhesives, paints, etc., must be constructed under the temperature and environment stated in the manual to ensure the stability of chemical product quality. Fifth, pay attention to site safety. With less clothing in the summer, the body is prone to sweat, and labor protection is required to enter the construction site. Bare feet make it easy to pierce the nails. Remember to power off the circuit when installing the circuit. Summer decoration knowledge paint three trees paint cement paint furniture floor tile tile adhesive floor tile The numbers on the Tape Measure are divided into two rows. One row of numbers is in centimeters/CM, and the other row is in inches. 1CM is about 0.3937 inches, and 1 inch is about 2.54CM. Therefore, the short distance between the two numbers is in centimeters. The longer one is inches, and the number fonts in centimeters are also smaller than those in inches, 100 cm = 1 meter. In use, the unit is generally in centimeters. Custom Tape Measure,Personalized Tape Measure,Custom Printed Tape Measure,Tape Measure Customization Shangqiu Yusheng Tools co.,Ltd. , https://www.cnystools.com