High-temperature insulation coating high performance full range of performance

The reporter learned that with the continuous upgrading of system technologies such as aerospace, automotive, military, petrochemical, metallurgy, electric power, and construction, the use of thermal insulation materials has become increasingly demanding, not only at higher operating temperatures. And the more demanding corrosive environment, but also has a thin layer of heat insulation, heat and environmental protection, anti-vibration, anti-fatigue, rapid temperature change resistance and erosion resistance, the traditional insulation material has been difficult to meet With the use of requirements, with the continuous development of energy-saving technologies, high-temperature insulation and energy-saving coatings came into being, which has played a very helpful role in energy conservation and emission reduction.

The high temperature insulation and heat insulation coating is exclusively developed and produced by Beijing Zhisheng Weihua Chemical Co., Ltd. The coating is a water-based inorganic high-performance coating, using Zhisheng Weihua special high-temperature solution and nano ceramic hollow microspheres, ** fibers, etc. as the inorganic raw material finishing. Into the temperature range of -80-1800 °C, thermal conductivity of only 0.03W / m. K, ZS-1 high temperature insulation coating can effectively inhibit and shield infrared radiant heat and heat conduction heat, thermal insulation inhibition efficiency of up to 90%, can inhibit the thermal radiation of high temperature objects and heat conduction loss, The internal heat of the object can be kept 70% without losing, and the low temperature object can effectively keep cool and can suppress the loss of the cooling caused by the environmental radiant heat and can prevent the object from condensing. ZS-1 high temperature heat insulation coating also has the characteristics of noise reduction, fire retardant, wear-resisting pressure, insulation breakdown resistance, acid and alkali resistance, light weight, convenient construction and long service life.

The high performance of high temperature insulation coating:

1, in the high temperature mold, the outer surface of the injection molding machine brushing a certain thickness of ZS-1 Zhisheng high temperature thermal insulation coating, 1100 °C mold surface coated with 8mm high temperature insulation coating mold coating surface temperature can be reduced to 100 °C Within this range, heat loss can be effectively reduced, and the working efficiency of the mold machinery can be improved.

2. Apply 3mm thick ZS-1 high-temperature thermal insulation and insulation coating on high-temperature flue and smoke exhaust pipes. The outer surface temperature of the pipe is generally reduced from 500°C to about 150°C, which is favorable for the emission of smoke and the decrease of condensation. To avoid unnecessary pipe corrosion;

3. Insulation and energy saving on the building wall, brushing ZS-1 high temperature heat insulation coating, good heat insulation effect, energy saving rate can reach more than 60%, 80% of the heat in the building can be kept from losing. Sheng Weihua paint waterproof and moisture-proof, fire-retardant grade can reach A level, no high-temperature generation of any harmful gases, inorganic environmental protection materials, long service life.

4. Apply ZS-1 high-temperature heat-insulation and heat-insulation coating on the ladle to reduce the heat conduction loss of the molten steel. The heat-resistant and heat-insulating effect is good. The weight of the traditional heat-insulating and heat-insulating material used for the ladle is reduced, which is beneficial to the ladle. Heat loss during movement;

5. Apply only 6mm thick ZS-1 high temperature insulation and heat insulation coating on the outer surface of industrial furnace to reduce heat loss by more than 30%. Apply 1mm surface to 8mm surface temperature. Zhicheng Weihua high temperature insulation coating object coating surface temperature It can be reduced to less than 100°C. Spraying on the outer surface of high-temperature pipelines, equipment and containers can effectively suppress the loss of heat radiation and heat, and the energy-saving rate is over 10%.

6. Apply 10mm thick ZS-1 high temperature insulation and heat insulation coating to the box below -30°C. The temperature in the box for 24 hours is not lower than 0°C;

7, hot water tank, dyeing cylinder insulation, in the hot water tank, dyeing tank appearance brushing ZS-1 high temperature thermal insulation coating, reduce the external surface temperature, reduce heat loss, reduce production costs, improve energy efficiency;

8. Apply ZS-1 high-temperature heat-insulation and heat-insulation coating on steam pipelines to reduce the loss of steam heat energy and protect personal safety;

9, Zhisheng Weihua high temperature insulation coating, brushed in a high temperature environment on low temperature metal plate, protect the metal plate from high temperature, do not exceed the high temperature phase of the metal plate, give full play to the performance of the metal plate Indicators to reduce the production costs of high temperature equipment;

10. Apply brushing ZS-1 high-temperature heat-insulation and heat-insulation paint on the hearth and stove to reduce heat loss and improve the utilization of heat energy. The energy-saving rate can reach more than 60%.