How do you know how to install the faucet?
The use frequency of the faucet is very large. If the installation is not good, it is prone to leakage, etc., which will have a great impact on the future of home life. Today Xiaobian will give you information on the steps and things to be aware of when installing the faucet. I hope you can help To everyone! First, ask experienced and qualified professionals to install. In particular, imported high-end products, small washers and small accessories, must be installed step by step in accordance with the drawings in order to ensure that there will be no leakage and other issues. Second, when installing, the faucet should try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the surface plating luster. Thirdly, if your faucet is used in the construction of new houses, because the water supply pipe network is a new one, there will certainly be impurities such as sand grains in the water. Before installation, it is necessary to pay attention to the removal of debris from the pipeline. Discharge water for a long time until the water quality becomes clear. Faucet. Fourth, do not use too much force to cause man-made damage when you turn it on and use it. Even traditional taps do not need to be screwed to death. After use, the faucet surface should be wiped clean. Do not use the handle as a handrail to support or use. Fifth, in the case of water pressure not lower than 0.02mpa, if the amount of water is found to decrease, even if the water heater turns off, cut off the flow of hot and cold water, and use a wrench to gently unscrew the water at the water outlet of the faucet. The mouth sieve cover, after cleaning impurities and carefully installed, can generally be restored as ever. Sixth, the shower head's showerhead metal hose should be kept in a natural stretch, and should not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention to the joint between the hose and the valve body not to form a dead angle, so as not to break or damage the hose. Seventh, do not use acidic and basic solvents when scrubbing faucets. After using the faucet for a period of time, if the amount of water is found to be reduced, use a spanner to unscrew the faucet strainer and clean it carefully before installing it. Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia). Hardware accessories installation
Baking rack,baking cooling mesh,Baking cooling rack,Cooling Rack, steel wire cooling rack, etc.
Baking wire mesh is made of high quality 304 stainless steel, never rusting and durable. Cooling Wire mesh does not have any coating or chemical ingredients, making food safer.
2 tier Cooling Rack,3 tier Cooling Rack,Foldable Cooling Rack,Creative Cooling Rack Shenzhen Lanejoy Technology Co.,LTD , https://www.ccls-vaccine.com
