Industrial Plug Type Industrial Plug Features
Industrial plugs are plugs that are used in industry and are generally used with industrial sockets. There are many places where it is applicable. Industrial plugs and sockets are used for all kinds of mechanical equipment, measuring instruments, power distribution equipment, transportation equipment, and central air conditioners for large public places. Next, Xiaobian introduces the characteristics of industrial plug types and industrial plugs. Industrial plug type For industrial plugs, there are relatively few connection points for electrical appliances, resulting in fewer factors of temperature rise and high safety factors. Therefore, in home life, all household appliances that can be placed in a certain position and no longer move should use fixed outlets whenever possible. The mobile socket can be moved in accordance with changes in the situation, and it is convenient to use. However, due to its frequent movement, there is a high chance of being bumped, resulting in a high possibility of damage and breakage, plus its once again passing through the plug and wall outlet. The connection increases the level of the electrical connection, so that the temperature rise factor increases, and the safety factor is small, so this socket is more suitable for the temporary and short-term use of electrical appliances. Industrial plug features 1, safe and reliable (1) This kind of product uses the shell color to express the rated voltage, if the blue represents 220V, the red represents 380V, at a glance, it is easy to distinguish, can not make a mistake. (2) The diameter, number of poles, and position of ground contacts of different specifications are different. Only the same specifications can be inserted to prevent mis-insertion. (3) Protection against electric shock. The grounding pole plug in the socket is longer than the phase pole and the neutral pole plug sleeve, which ensures that the plug is connected before the phase pole is connected and the grounding pole is finally detached when the plug is plugged in, and the use is very safe. (4) High degree of protection. IP44 anti-splash type, IP67 anti-soaked type, etc. Not only can the human body not touch live parts, it can also be used under different environmental conditions to ensure safety. (5) The elastic sleeve is added to the insertion sleeve. Ensure that the plug is in close contact with good conductivity and long service life. (6) There is a holding device, so that plugs and sockets can be clamped and prevented from coming off after plugging. The reliability is greatly improved. (7) There is a cable holder device that can clamp the cable jacket so that it will not be pulled out and it is safe to use. 2, durable (1) Good mechanical properties. The product shell is made of high-quality engineering plastics, which has high strength, impact resistance, and is not afraid to drop or step on. The rubber and plastic used have anti-aging properties and can be used not only indoors, but also outdoors, for durability. (2) Heat and flame resistance. The housing and the internal insulating parts are heat-resistant, the temperature can reach (100±5)°C, the important parts can withstand (125±5)°C; and they are fire-retardant. (3) more resistant to use plug. For products with a rated current of 16A, the number of normal plugging cycles is more than 5,000. (4) The temperature rise test of the conductive contact parts (plugs, plugs) does not exceed 50K and is suitable for long-term use. 3, strong versatility Products using GB/T 11918 ~ 11919 - 2001 standard, it is equivalent to IEC 60309 1 and 2 standards, completely in line with international standards. Therefore, such products are common at home and abroad. At the same time, its variety of specifications can meet a variety of occasions and uses. These characteristics of industrial plugs and sockets make it highly safe and reliable and internationally versatile. Therefore, it has gradually received attention in the country. Through more than ten years of continuous promotion and application, industrial plugs and sockets have entered all walks of life, such as electricity, construction, port terminals, machinery industry and modern large-scale construction. The manufacturers have also grown from the initial few to the current dozens. At the same time, with the development of science and technology, industrial plugs and sockets continue to innovate, a variety of rapid installation technology has been applied to the plug and socket, making it more convenient. Industrial plug specifications The industrial plug can be divided into a detachable plug and a wall-mounted socket according to the installation of the wiring device. The material of the socket is imported PC anti-ballistic adhesive material, which has high strength and strong anti-aging ability. The plug has four chips, and the three-phase and four-level industrial plugs represent the top chip is the neutral line. The left and right sides and the underside are the phase lines. Through the optimized design of the terminal blocks, the wiring can be installed effectively and quickly. The setting of the independent sockets avoids the burning phenomenon that occurs due to prolonged use of heat. Editor's summary: The types of industrial plugs and the characteristics of industrial plugs are introduced here. We hope to help everyone. If you want to know more about yourself, you can follow the information on this site. Plug industrial plug type
Brass knurled thread insert Made of material, good thermal conductivity and heat resistance.
Widely Used On the Injection molding for Tightly Fixing.
Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
China leading manufacturers and suppliers of Hex Nut,Hexagonal Nut, and we are specialize in Stainless Steel Nuts,Hex Nut Bolt, etc.
Brass hex nut,hex coupling nut,hex flange nut,hex thin nut,hex bolts and nut Shenzhen Lanejoy Technology Co.,LTD , https://www.szlanejoy.com
