Installation adjustment of coal powder dusting machine
Art Blade,Runner Art Blade,Utility Knife,Utility Blade Chunlei Quntification Co.,Ltd , https://www.hychunleitools.com
Installation adjustment of coal duster:
Machine installation:
The mill is preferably fixed on the cast concrete foundation with the M12 anchor bolts, or it can be fixed on the wooden backing plate. The machine should be horizontal, straight and firm after installation.
Adjustment of the transmission belt tightness:
1. Adjusting the tightness of the V-belt When the V-belt is too tight, the motor bearing heats up. When it is too loose, the rotation speed of the grinding roller is reduced, and the V-belt is easy to vibrate. These affect the service life. When adjusting the tension of the V-belt, The bolts of the fixed motor base are loosened, and the position of the motor on the slide is changed by the adjusting bolts, so that the triangular belts reach the required tightness, and then the fixing bolts are tightened. After the triangular belts are damaged, they must be replaced in groups, and the new ones are replaced. In the group of V-belts, the length and tension should be the same to avoid premature damage from uneven force.
2. Adjusting the tightness of the flat belt When the flat belt is too loose, the belt buckle can be disassembled, the flat belt is properly cut short, and the new belt buckle is used to connect. The belt is too tight to make the bearing heat.