Introduction to excavator related parameters
Operating weight Operating weight is one of the three important parameters of the excavator (engine power, bucket capacity, operating weight) The operating weight determines the level of the excavator and determines the upper limit of the excavating force of the excavator. Digging force ≦ m Ì working weight m: adhesion coefficient between the ground and the track If the digging force exceeds this limit, in the case of a backhoe, the excavator will slip and be pulled forward, which is very dangerous. In the case of a shovel, the excavator will slip backwards. Digging force For digging forces, the digging force is mainly divided into the arm digging force and the bucket digging force. The action points of the two digging forces are the root of the bucket (the lip of the bucket), but the power is different, the digging force of the arm comes from the arm cylinder; and the digging force of the bucket comes from the bucket cylinder. Grounding pressure The magnitude of the grounding specific pressure determines the ground conditions under which the excavator is suitable for operation. Grounding pressure refers to the pressure exerted by the weight of the machine on the ground and is expressed by the following formula: Grounding specific pressure = working weight ÷ all contact area with the ground Track shoe • It is important to equip the machine with a suitable track shoe. For crawler excavators, the standard for selecting tracks is to use the narrowest track shoes whenever possible. ·Common track type: tooth track plate, Walking speed and traction For crawler excavators, walking time is about one-tenth of the total working time. In general, the two speeds can meet the walking performance of the excavator. Traction refers to the force generated when the excavator walks, mainly depending on the travel motor of the excavator. These two walking performance parameters indicate the maneuverability of the excavator's walking and its walking ability. It can be reflected in the samples of various manufacturers. Gradeability Gradeability Climbing ability refers to the ability to climb, downhill, or stop on a solid, flat slope. Two representations: angle, percentage improving capability Lifting capacity refers to the smaller of rated rated lifting capacity or rated hydraulic lifting capacity. Rated stable lifting capacity: 75% tipping load Rated hydraulic lifting capacity: 87% hydraulic lifting capacity Swing speed The slewing speed is the average maximum speed that can be achieved by a stable slewing when the excavator is idling. This means that the defined speed of rotation is neither the start-up nor the speed of rotation during braking; that is, the speed of rotation that is not accelerated or decelerated. For general excavation work, when the excavator is operated in the range of 0° to 180°, the swing motor accelerates or decelerates, and when it is turned into the range of 270° to 360°, the swing speed is stabilized. Therefore, in actual excavation work, the above defined speed of rotation is impractical. That is, the actual swing performance required is the acceleration/deceleration expressed in terms of the swing torque. Engine power Gross horsepower refers to the output power measured on the engine flywheel without the consumption of power accessories such as silencers, fans, alternators and air filters. Net horsepower refers to the output power measured on the engine flywheel with all power-consuming accessories such as silencers, fans, alternators and air filters. Noise measurement Excavator noise is mainly from the engine. Two types of noise: noise measurement at the operator's ear, noise measurement around the machine.
Bathroom stainless steel sinks are a type of sink commonly found in many modern bathrooms. These sinks are made from durable stainless steel and offer a sleek and minimalist look. They come in a variety of shapes and sizes to fit any bathroom layout and design style.One of the benefits of a bathroom stainless steel sink is its durability and resistance to corrosion and staining. They are also easy to clean and maintain, making them a popular choice for busy households. Additionally, stainless steel sinks are affordable and widely available, making them a practical option for any budget.Bathroom stainless steel sinks can be divided into two main categories: undermount and top-mount. Undermount sinks are installed underneath the countertop, offering a seamless and integrated look. Top-mount sinks sit on top of the countertop, creating a border around the sink.When choosing a bathroom stainless steel sink, it`s important to consider the size and layout of your bathroom, as well as your personal preferences and budget. With a wide range of styles and sizes available, you are sure to find a bathroom stainless steel sink that meets your needs and complements your bathroom decoration.
Bathroom Accessories,Shower Accessories,Bathroom Facilities,Home Bathroom Accessories JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.meiaogroups.com