Is the belt fabric as good as possible?

With regard to the use of belts, many customers have already asked this question, and in general people's understanding, the more cloth layers the belt has, the more durable it is and the longer its service life is. However, is this really the case? As we all know, the skeleton material inside the belt (which is the cloth layer) plays a role in supporting the longitudinal stretching of the belt. The more material that is conveyed, the heavier and the longer the distance to be transported, the higher the requirement for the skeleton material and the same unit conveying. The amount of transport of 20 meters and delivery of 100 meters, the longitudinal tensile strength requirements of the belt must be different. But this is just one aspect of the physical properties of the belt. In addition to the different requirements on the tensile properties of the belt during use, the thickness of the rubber is the key factor that affects the use of the belt. The more rubber-resistant belts, the skeleton material will not be damaged by friction, and the service life will be longer. Therefore, the proper increase in the thickness of the rubber material of the belt is the key to improving the service life of the belt. At present, some belt manufacturers, using physical properties not up to standard canvas as raw materials, in front of customers to advocate the number of fabric layers more and more durable, deceive customers to buy a number of fabric belts, in fact, lack of professional ethics. Because this will bring a lot of problems to customers, the first is that the weight of the belt will increase a lot, so the transmission of the motor will increase the unnecessary burden, instead of affecting the normal material delivery, long time and more power is a trivial matter, including the motor, roller Roller and other accessories will affect the service life, frequently problems. Secondly, too many belt layers will inevitably cause the increase of the thickness of the belt body, which will cause the belt body to be too hard and affect the flexibility of the belt. When the belt passes over the drum, the inclusion of the roller is not easy to cause pulleys and other risk factors. After the rubber material on the outside of the belt has worn out, many more layers will not be able to get rid of the fate of replacing the belt. Therefore, the customer must not be blindly determined by the unscrupulous businessmen in the purchase of the belt. The best solution is to Ask more questions, synthesize the most correct answers from different manufacturers, and avoid unnecessary losses. The last sentence, Kaifeng Yulong wish you a smooth job!

Electric Jigsaw

The 650W 800W Jig Saw is used for Cutting Wood, Plastic Tube, Aluminum Bar, with 6 speed, 4 Pendulum Settings, Bevel Cutting 45°,Laser Function.

No burrs with good blade.

Jigsaw is the wood working power tools, Perfect for cutting curve, hole digging,can cut 3cm circle.

Portable Jigsaw With variable speed, 0-3000rpm, for different material cutting.

The Jigsaw with 20mm stoke, T-shank Blade.

The 800W Jigsaw can cutting Capacity: Wood:80mm, steel:10mm

The Jig Saw with 4 Pendulum, 0 setting for metal, 1 setting for wood, 2-3 setting for soft wood.

Jig Saw with Normal clamp chuck,Iron base.

Hand Jig Saw with a counterbalanced low-vibration plunge mechanism

Power Saw With a dust blower for max cut -line visibility.

Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.

The Jig Saw is equipped with Guide ruler, to control the cutting width.

Built-in Laser Function, for better cutting line ability.

CE/GS/EMC/ROHS certificate.

Electric Jig Saw Jigsaw,Electric Jigsaw,Power Jigsaws,Electric Jig Saws,Cordless Electric Jig Saw

Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com