Look at the car steering wheel to find out early

Home>Bearing knowledge>See the car steering wheel early detection of problems
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Look at the car steering wheel to find out early

Source: China Bearing Network Time: 2014-02-24

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The steering wheel is a very important control for the whole car; it is related to many aspects; on the other hand, many local problems can also be expressed through the steering wheel. So; carefully investigate and feel the steering wheel; can find some cars early Faulty.
When moving above medium speed; the vehicle with strong steering wheel; the chassis has periodic abnormal noise; it can be because the balance of the directional transmission is damaged; the transmission shaft and its spline shaft and spline sleeve can exhibit excessive wear.
Feeling heavy and heavy when turning; can be too tight cooperation of rolling bearings in various parts of the steering system; poor bearing smoothness; too tight or lack of oil in the ball that is turned to the straight rod; in addition; lack of air pressure in the front tire; can also cause this situation to be presented.
The steering wheel is difficult to operate; when traveling or braking; the direction of the vehicle is actively inclined to the side of the road; this condition can be caused by the inconsistency of the front wheel standards or the air pressure on both sides, and the front wheel inclination angles on the two sides are not equal, the front wheel bearing gaps are inconsistent or This situation can also be formed if the wheelbase is too large.
The whole vehicle has a sense of arbitrariness; it is often caused by the front wheel swinging head. When the vehicle reaches a certain high speed; the steering wheel can present a situation of tremor or shivering; and even feel the sense of direction of the car is inconsistent with the expected operation. At this time, the speed of the car should be slowed down accordingly. However, the repair of the tire or tire repair causes the front wheel assembly to be damaged, the damper is ineffective, the steering system is worn out, and the front wheel is not properly calibrated. Can also form such a result.

Recommend to friends comments close window

Bearing related knowledge
Imported bearing device equipped with common sense angle touch ball bearing sealing method Bearing terminology Detailed inch tapered roller bearing M86649/10
What time is the best time to change oil for imported bearings?


This article links to http://
Please indicate the bearing network http://

Previous:Analysis of the tumbling skills of the INA bearing. The following is a series of misunderstandings on the quality of the bearings when purchasing bearings.

3 Inch Stainless Steel Casters

3 Inch Stainless Steel Caster, we use high quality 304 stainless steel. It has great anti-rust effect. And Single wheel is TPR material. The model is sold very popular now.


stainless steel caster

stainless steel

3 Inch Stainless Steel Caster,3 Inch Stainless Steel Caster Wheels,3 Inch Stainless Casters

Yangjiang Xingyang Industry & Trade Co.,Ltd. , https://www.xycaster.com