Method for preparing different types of corn straw silage

First, the whole plant corn with ear silage production n9e China feed industry information network - based on feed, service animal husbandry

After harvesting the whole plant with the ear of corn stalks, the chopped corn stalks were chopped into a straw of 2 to 3 cm. Firstly, 15~20cm thick hay is laid on the bottom of the silage kiln, and the mashed corn stalks are layered into the shovel. The corn stalks are compacted by a tractor every 20cm, and the storage material is 50~60cm higher than the sputum. It is in the shape of a curved ridge with a low height in the middle and four weeks. Then, the corn stalks are tightly covered with 2 to 3 layers of plastic film, and a layer of 20 to 30 cm thick wet soil is pressed up to make a light seal. N9e China Feed Industry Information Network - based on feed, serving animal husbandry

Second, the production of fresh corn straw silage n9e China feed industry information network - based on feed, service animal husbandry

The seed corn parent is cut into 2~3cm long grass by a silking machine, filled layer by layer, and layer by layer, each layer is about 15~20cm thick, until the storage material is more than 60cm beyond the mouth, and the plastic film is used after the stepping. The storage material is tightly covered, and the plastic film is compacted and sealed with wet soil. N9e China Feed Industry Information Network - based on feed, serving animal husbandry

Third, the production of dry corn stalk micro- storage feed n9e China feed industry information network - based on feed, service animal husbandry

The dried corn stalks that have not been mold-dried and dried naturally are smashed into 2 to 3 cm with a silking machine, and then the live bacteria of straw stalk (kg), strain (g), salt (g), water (ml) are selected from Xi'an Xintiandi. ) Prepare the microbial agent according to the dosage ratio of 1000:3:7:800~1000, and add appropriate amount of white sugar. Then, the storage materials are filled layer by layer, and the microbial agent and water are sprayed layer by layer (about 110-120 kg of fresh water per ton of dry straw), layer by layer, each layer is about 20-30 cm thick, and so on until the dome 50 is raised. ~60cm, and finally sprinkle salt on the top (the amount of salt is 250g per square meter), and then cover the plastic film after compaction. The film is covered with 15-20cm and sealed. N9e China Feed Industry Information Network - based on feed, serving animal husbandry

Fourth, the production of dry corn stalk yellow stockpile n9e China feed industry information network - based on feed, service animal husbandry

The dry corn stalks that have not been mold-dried and dried naturally are smashed into a length of 2 to 3 cm by a twisting machine, and then about 110 to 120 kg of fresh water is added per ton of dry straw to keep the water content of the straw at about 65%, that is, the hand is tightly stored. Material, it is advisable to have water drops on the finger but not dripping water, and then fill it layer by layer. At the same time, adding additives (30kg urea and 2.5kg salt per ton of straw), layer by layer until the storage material is 60cm higher than the mouthwash. After the pile of soil 30cm seal. N9e China Feed Industry Information Network - based on feed, serving animal husbandry

CA Temporary Fence

CA Temporary Fence

CA Temporary Fence Introduction:

Temporary Fence is also called Construction Fence,Removable Fence and Portable Fence. This type was very popular in Canada, the United States, and some other America countries. It is quick to be set up and easy to move and is ideal for restricting access or containing a site and is commonly seen at construction sites, public events, as a dog run, or anywhere crowd control is important. It offers the benefits of affordability and flexibility.

Ca Temporary Fence,Temporary Fencing Panel,Construction Temporary Fence,Temporary Construction Fence Panel

HeBei Bosen Metal Products Co.,Ltd , https://www.hbbosenfence.com