Non Explosive Demolition Chemicals for Construction and Quarry

Model NO.: SCA-I; SCA-II; SCA-III
Fume: No Toxic Fumes
Manufacturer: Manufacturer Price
Trademark: SPLITSTAR
Transport Package: 5kg/Bag, 4bags/Box, 26tons/20" Container
Specification: MSDS SGS
Origin: Xiamen Fujian
HS Code: 38249099
What is Non-explosive demolition / cracking agent (Brand:SPLITSTAR®)

Non-explosive demolition / cracking agent is a soundless and safe demolition agent which is quite different from ordinary demolition agents such as explosives and dangerous materials. It does not cause any fly rock, noise, ground vibration, gas, dust or any other environmental pollution when used properly.

As requirements for demolishing rock and reinforced concrete in construction increase in tight quarters, the use of explosives and explosive agents is becoming more restricted as far as safety and environmental pollution problems are concerned. Non-explosive demolition / cracking agent is the solution.
Non-explosive demolition / cracking agent is a powder with amazing 18,000 PSI expansive strength when mixed with common water. Poured into holes, Non-explosive demolition / cracking agent breaks reinforced concrete & rock safely and quietly, while providing SILENT cracking. 

Since Non-explosive demolition / cracking agent provides controlled demolition according to drilling patterns, it is very easy to break reinforced concrete and all kinds of stone into desired sizes and shapes, without noise, vibration or dust.

Non Explosive Demolition Chemicals for Construction and Quarry

Reinforced Concrete Demolition & Cutting
In demolition, concrete cutting & excavating industry, Non-explosive demolition / cracking agent helps you to break reinforced concrete and rock into chunks, so you may easily cut off rebar, haul it away with a crane or truck without damage remaining part. 

Rock Breaking & Excavation  
In mining and quarrying industry, Non-explosive demolition / cracking agent helps to achieve perfect slabs and blocks from limestone, onyx, marble, granite or any other type of stone you are working with. Compares to blasting, Non-explosive demolition / cracking agent avoids waste of valuable stone, high insurance, costly storage and labor.

Stone Quarrying & Dimension
Non-explosive demolition / cracking agent can also be applied along with traditional methods like primer cord, hydraulic breaker, diamond blade saw and jackhammer to help cut cost, work time and increase safety, Plus its silent operation, Non-explosive demolition / cracking agent is perfect for residential, school, hospital and airport area.
Alternative to Blasting, Breaker, Jackhammer, Diamond Saw...
Non-explosive demolition / cracking agent helps your work to become more efficient and cost effective. 

Non Explosive Demolition Chemicals for Construction and Quarry

Applications
A. Granite, marble, sandstone, limestone, quartzite quarrying and cutting
B.  Rocks pre-splitting, fracture, cutting, demolishing and removal
C.  Controlled demolition or cutting concrete when explosives not allowed
D.  Fracture and demolition of the concrete buildings and structures 
E.  Rocks cutting for road construction 
F.  Excavation of trenches and foundations 
G.  Underground excavations and removing boulders 
H.  Marine excavations including underwater operations

Non Explosive Demolition Chemicals for Construction and Quarry

Package & Storage
Container and Storage Non-explosive demolition / cracking agent is packed in 4 anti-moisture bags of 5 kg (11 lb.) each and then placed in a water proofed carton with a total weight of approximately 20 kg (44 lb.).
Although Non-explosive demolition / cracking agent is packed in anti-moisture paper bags, long storage may cause deterioration of its working ingredients. Therefore, store in a dry place and use it as soon as possible.
When storing, do not place the bags of Non-explosive demolition / cracking agent directly on floor, put them on a pallet and keep in a dry warehouse etc. Non-explosive demolition / cracking agent, stored in this manner, can be effectively used for about 1 year.

Non-explosive demolition / cracking agent should be unpacked before use.
When storing the portion of Non-explosive demolition / cracking agent remaining after use, push the air out of the bag, then seal with gum tape and use as soon as possible. However, as it may get exposed to moisture there is a risk of Non-explosive demolition / cracking agent losing its effectiveness once the bag has been opened.

If you receive broken bags of Non-explosive demolition / cracking agent, they may not work due to chance of moisture absorption.


Non Explosive Demolition Chemicals for Construction and Quarry


Type
Type of SPLITSTAR Usable temperature
SCA-1 25°C-40°C  (77°F-104°F)
SCA-2 10°C-25°C  (50°F-77°F)
SCA-3 -5°C-10°C  (23°F-50°F)
SCA-4 40°C-50°C  (104°F-122°F)

Consumption
Hole diameter(mm) 30 32 34 36 38 40 42 44 46 48 50
Consumption(kg/m³) 1.2 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.8 3.0 3.2
Hole depth (m)                                        1


Quantity of splitstar used per 1m3
Kinds of objects to be demolished Standard quantity of  splitstar per 1m3
Rocks Soft rock 5-8kg
Medium rock 8-12kg
Hard rock 12-20kg
Concrete Plain concrete 5-8kg
Reinforced
concrete
Concrete including less quantity of re-bars 10-25kg
Concrete including much quantity of re-bars 20-35kg
Bricks     10-25kg

 

Double Bowl Kitchen Sink

Double Bowl Kitchen Sink,Double Bowl Sink,Double Basin Kitchen Sink,Double Bowl Stainless Steel Sink

Guangdong Huayou Hardware Products Co.,Ltd , https://www.gdhuayouhardware.com