Pump maintenance precautions
Double Acting Hydraulic Jack,Hydraulic Piston Cylinder Color,Stainless Steel Hydraulic Cylinders,Hydraulic Cylinders Taizhou Juhuan Lifting Protection Equipment Co., Ltd , https://www.jsjoba.com
In daily life, the use of the pump is more extensive. Pumps are used to transport liquids or to pressurize liquids. Liquid mechanical energy is transmitted to the liquid to increase the energy of the liquid. It can deliver fluids as well as convey gas-liquid mixtures or volumes containing suspended solids. When we use the pump will encounter maintenance problems, the following will introduce the pump maintenance considerations. First, avoid by "experience." Such as the pump valve leakage in the emergence of some machine plans to save trouble, before each boot, fill the inlet pipe to fill some dry soil, and then rushed to the soil rushed to the end of the valve so that the end of the valve watertight. This method looks easy, but not enough. Because when the pump starts to work, the bottom valve of the sand will be with the water into the pump, wear impeller, pump housing and shaft, seriously affecting the service life, the correct method should be overhaul the bottom valve, it can not be repaired ,replace. Second, find out the fault should be promptly eliminated, should not allow the crew "sick" work. For example, found that the pump shaft packing wear serious, to increase the filler, otherwise it will make the pump shaft packing leak. Pump shaft packing leaks not only make the unit energy consumption is too large, and cavitation will occur to speed up the damage to the impeller, a direct impact on pump life. As another example, found that the pump vibration, should immediately stop checking, or if the pump is likely to be bent and deformed safety accidents. In the maintenance, not only to strictly follow the pump maintenance matters needing attention, we also have to do in the daily use of maintenance work. Such as: in each use after the end of the regular cleaning of the pump; check the ball bearings to keep clean; to prevent debris and so on.