Recycled Rubber Traffic Safety Speed Bumps--Top Quality
2000 Lbs electric winch are 12 v and 24 v DC winches.
It can be used for marine railway, atv or boat applications.
If you need to get something unstuck, lifted, or loaded, an electric winch can save a ton of back-breaking work.
The hardest part may be deciding which one you need.
Winches are commonly available with either a 12V DC or a 110V AC motor.
For fixed operations, such as a marine railway, a 110V winch works well because it can be plugged into an electrical outlet.
For portable applications or use with a vehicle as the anchor, a 12V winch is the way to go. These units can be hard-wired into a vehicle or simply hooked up to a battery.
The next consideration is capacity-what weight rating should you look for? As a general rule, take the maximum load that you expect to winch and multiply it by 1.5. The weight rating is based on the first wrap of the cable around the drum. With each layer of cable, the pull capacity actually drops, so when in doubt, go larger.
Always stay well to the side of a working winch, and always drape a heavy jacket or tarp over the line. If a cable breaks, the heavy material will help absorb the energy of the taut cable as it snaps back, and reduce the chance of injury.
If a load outweighs your winch rating, remember those high school physics lessons about pulleys and mechanical advantage. You can double the pulling capacity by [doubling" the line. Run it through a Snatch Block attached to the object you`re moving and then back to a fixed object. Twice the capacity, however, equals half the pulling speed.
winches, other winches, electric winch,2000 Lbs Winch,2000 Lbs Winches Suzhou DAO Material Technologies Co.,Ltd , https://www.dao-compass.com
1) Speed Bumps Are Useful On Areas Where Vehicles Speed Are Required a Minimal Speed In front Of Schools, Hospitals, Children's Playground And Residential areas Etc.
2) Warns Drivers To Slow Down
3) Suitable in Residential Villages & Commercial Areas
4) Removable Speed Humps
5) Made Of  Heavy Duty Rubber Materials
6)Packaging:4 pieces/woven bag
Specifications
1)Material: high quality rubber
2)Size: L500*W350*H45/50mm/(L*W*H) ,various size are available
3)Weight: 12-20 kg/meter
4)Compression resistance :> 200mpa
5)Durability :> 3years
Features:
1)Specialized designed, notable decelerate effect,without noise and uncomfortable feeling.
2) High quality rubber,firm and useful, good anti-impactability.
3)Set up flexibly according to the request of  customer, convenient installment.
4)Black &Yellow, affect In Day and Night , attract the attention of the drivers to decelerate successfully
5)UV, moisture and temperature resistant.
6)Grooved for drainage of the rain water.
7)Widely  used , one of the newest trafffic safe productions.
Installation instructions:
1) On the surface of asphalt/concrete roads
2) To improve life span, road surface should be smooth and clean.
3)Drilling holes, using special adhesive on the bottom of bump.
3) Using a steel bar or PVC pipe to link the Holes
4) Fixer For Asphalt Roads : Expansive Screw  (Standard parts, The Customer Can Easily Purchase On Local Market)
5)Fixer For Concrete Roads: Bolt  (Standard Parts, The Customer Can Easily Purchase On Local Market)
Â
Introduction
1) Speed Bumps Are Useful On Areas Where Vehicles Speed Are Required a Minimal Speed In front Of Schools, Hospitals, Children's Playground And Residential areas Etc.
2) Warns Drivers To Slow Down
3) Suitable in Residential Villages & Commercial Areas
4) Removable Speed Humps
5) Made Of  Heavy Duty Rubber Materials
6)Packaging:4 pieces/woven bag
Specifications
1)Material: high quality rubber
2)Size: L500*W350*H45/50mm/(L*W*H) ,various size are available
3)Weight: 12-20 kg/meter
4)Compression resistance :> 200mpa
5)Durability :> 3years
Features:
1)Specialized designed, notable decelerate effect,without noise and uncomfortable feeling.
2) High quality rubber,firm and useful, good anti-impactability.
3)Set up flexibly according to the request of  customer, convenient installment.
4)Black &Yellow, affect In Day and Night , attract the attention of the drivers to decelerate successfully
5)UV, moisture and temperature resistant.
6)Grooved for drainage of the rain water.
7)Widely  used , one of the newest trafffic safe productions.
Installation instructions:
1) On the surface of asphalt/concrete roads
2) To improve life span, road surface should be smooth and clean.
3)Drilling holes, using special adhesive on the bottom of bump.
3) Using a steel bar or PVC pipe to link the Holes
4) Fixer For Asphalt Roads : Expansive Screw  (Standard parts, The Customer Can Easily Purchase On Local Market)
5)Fixer For Concrete Roads: Bolt  (Standard Parts, The Customer Can Easily Purchase On Local Market)
Â