Screw pump parameter flow
Bitumen Pump,Bitumen Transfer Pump,Bitumen Gear Pump,Bitumen Emulsion Pump Hengshui Yuanhan Trading Co.,Ltd , https://www.hengshuiyuanhanpump.com
The flow parameter is one of the important parameters of the pump, which is the amount of fluid delivered by the pump per unit of time. Whether it is a gear pump,
Flow parameters are required for Screw Pump or centrifugal pump selection.
Common units of flow parameters are volume flow and mass flow. The unit of general volume flow is m3/s, m3/h or L/s.
The unit of mass flow is generally expressed in Kg/s or Kg/h. The relationship between mass flow and volume flow is: mass flow = medium density
Degree * volume flow.
The flow rate indicated on our pump manufacturer's sample is the rated flow of the pump, and the rated flow is the flow that the pump can guarantee.
The rated flow is generally greater than the normal operating flow, but the rated flow is not the maximum or minimum allowable flow of the pump. Normal operating flow
It is the flow required to reach its scale production under normal operating conditions.
The flow rate of the three-screw pump produced by our company's Botou Gear Pump Factory is generally 0.6-123m3/h. Twin screw pump flow is generally
At 1-2000m3/h. The flow rate of a Single Screw Pump is generally between 0.1 and 150 m3/h.
Botou Gear Pump Factory Website http://