Some waterproof precautions before tiling
The temperature rises little by little, indicating that spring has come quietly. Just after the long winter of snow and ice, have you started planning the renovation of the spring? Maybe you just bought a new house and ready to be fully renovated. Maybe you want to transform the old house into a more fashionable and practical one. I have collected a lot of information about the decoration of the home, I believe that can help you make your home more comfortable. Nowadays people are busy and nervous every day, and a warm home can bring everyone the most relaxing leisure time. But how can you make your home warm and comfortable? With a little skill, you can easily create a pleasant home. Personnel: Generally, 247 workers are required. Order: first affix the wall tiles, then affix the floor tiles. Time: A good bricklayer is to stick 5-6 squares a day, otherwise it is difficult to guarantee quality. Especially in places like window sills that require small diagonals, it takes a lot of time. 1. Paving colored glazed bricks: Treatment of the base layer → elastic line → tile soaking water → paving cement mortar → installing standard blocks → paving the floor tiles → jointing → cleaning → curing. 2, paving ceramic mosaic tiles (mosaic) category: Treatment of the base layer → elastic line, standard reinforcement → paving cement mortar → paving → photographing → sprinkling water, uncovering paper → sewing, filling, cleaning → curing. 2. Construction points for paving ceramic floor tiles 1. The concrete floor should be chiseled at the base layer, the depth of the chiseling is 5~10 mm, and the spacing of the chisel marks is about 30 mm. After that, the clean floating ash, mortar, oil stains, and the production of scattered water brush will be less on the ground. 2, before laying the line should play a good line, on the ground pops the baseline line at right angles to the doorway, the line should start from the door to ensure that the entrance is a whole brick, the non-whole brick is placed under the corner or furniture, the elastic line should Pop up the vertical and horizontal positioning control line. 3. Before laying the ceramic floor tiles, the ceramic floor tiles should be immersed in the shade. 4. When paving, the cement mortar should be satisfactorily applied to the back of the ceramic floor tile. After the paving, the rubber mortar is used for knocking. At the same time, check the calibration with a level gauge and wipe the surface cement mortar. 5, after 2 to 3 hours of paving, use white cement to wipe the seam, cement, sand = 1:1 (volume ratio) of cement mortar, the seam should be filled dense, smooth and smooth. Wipe the surface with cotton wool so that it can be clean and waterproof.
CROSS Type welded/seamless EQUAL AND REDUCER
Pipe Cross,Cross Pipe Fittings,Cross fittings,Straight Pipe Fittings HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com
Standard: ASME/ANSI B16.9 ANSI/ASME B16.11 ANSI/ASME B16.28
BSEN10253-2 BS EN10253-4
Size:1/2''~48''(Seamless); 16''~80''(Welded)
Wall thickness: Sch5~Sch160\XXS
Manufacturing process: Hot Extruded , cold extruded ,pressed , etc.
Material:
Carbon steel:
FSGP PG370W PT370
.ASTM / ASME A234: WPB - WPC - WP1WP11 - WP12 - WP5 - WP22 - - WP91
ASTM / ASME A/SA 420: WPL6 - WPL3EN 10216-2: P195GH - P235GH - P265GH-P355Nh
20MnNb6 - 16Mo3 - 8MoB5-4 - 14MoV6310CrMo5-5 - 13CrMo4-5 - 10CrMo9-10-15NiCuMoNb5-6-4 - X11CrMo5X11CrMo9-1 - X10CrMoVNb9-1X10CrWMoVNb9-2 - X20CrMoV11-1former BS-DIN-AFNOR equivalent grades)
HIGH YIELD STEEL FOR PIPELINE AND OFFSHORE FITTINGS
ASTM A860 / MSS-SP75: WPHY 42WPHY 46 - WPHY 52 - WPHY 60-WPHY 65 - WPHY 70 grades
WPHY 80 only as per MSS-SP75 EN 10208-2: L245NB - L290NBL360NB - L415NB - L360QBL415QB - L450QB - L485QB - L555Q
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A234 WP5/WP9/WP11/WP12/WP22/WP91;
ASTM A860 WPHY42/WPHY52/WPHY60/WPHY65;
ASTM A420 WPL3/WPL6/WPL9;
Duplex steel
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800