The brick on the wall is not good brick wall construction precautions
Today, it has become a new type of posting method, so most users will be recommended to use floor tiles instead of wall tiles when buying tiles, but many people say that this method is easy to cause empty drums, and it will take a long time. out, then the tiles on the wall, OK it? Let's take a look. Brick wall is good First, the wall is good or bad: Advantages It is now a more fashionable way, especially some self-built houses and villas. It is used to dress up a kind of grandness, beauty and high grade. Second, the floor on the wall is not good: the shortcomings of the wall on the floor tiles 1. Everyone knows that the physical characteristics and production methods of the two are different. As a result, the water absorption rate of the wall tiles is much higher than that of the floor tiles. In this way, it is easy to cause emptying when paving, and if it takes a long time, it will appear. Falling off, there is a safety hazard. 2, from the material comparison, the surface of the wall tile is more smooth, cleaning is also more convenient, although for the bathroom, it has little impact, but if placed in the kitchen installation, cleaning and care is a big problem. 3, due to the greater difficulty of paving, resulting in the corresponding labor costs are also higher, thus virtually added a lot of costs, especially the large area of ​​paving, will far exceed the decoration budget. Brick wall construction considerations 1. First, look at whether the walls can be used for paving, whether there is any empty or broken condition, and whether some of the details of the surface treatment are qualified. If it is found, it needs to be rectified before paving. 2. If cement mortar is used, it must be pulled before pavement so that the contact area between the two can be increased to some extent. 3, after determining the level of a good floor tile, use wood to support the stability, to prevent the falling bricks. 4. If the wall is too dry, it should be moistened with boiling water one day in advance. 5. If mortar is used as a binder, to prevent problems, it should be spread over the entire back of the brick. 6, in the paving, can be carried out layer by layer, not the whole wall should be paved to the top to prevent falling. From the aspect of decoration, paving tiles on the walls can really make the whole house more beautiful and atmospheric, but if it is in the process of paving, the process does not meet relevant standards and is extremely prone to danger. Therefore, it must not be constructed. Careless. 0 Anfeng Magnets Manufactruing Co.,Ltd , https://www.anfengmagnetics.com
