The three selection principles of natural stone

[Students' questions] The three major selection principles of natural stone?

[Answer] The three principles of natural stone selection

Abstract: Recently, there has also been a composite sheet product in which stone is combined with plastic or aluminum. The back of the marble sheet is bonded with foamed polyester or aluminum honeycomb structure material and glass fiber cotton felt to form light weight and high strength. Composite sheet with thermal insulation properties. The stone used for building finishes must be chosen in consideration of the harmony of its color and natural texture with the surrounding environment of the building, fully reflecting the artistic beauty of the building.

When buying natural stone first, we should pay attention to some matters and follow some principles before we can purchase stone products that are economical and of superior quality. Blind choices will only be misunderstood.

The first point. Economical. When conditions permit, try to take materials as much as possible to shorten the distance, reduce labor intensity and reduce costs.

Second point. Strength and performance. The strength of stone is closely related to its durability, wear resistance and impact resistance. Therefore, according to the importance of the building and the environment in which the building is located, stone of sufficient strength should be selected to ensure the durability of the building.

In addition, in recent years, there has also been a composite sheet product of stone and plastic or aluminum material, which is to bond foam polyester or aluminum honeycomb structure material and glass fiber cotton felt to the back of the marble sheet to form light weight and high strength. Composite sheet with thermal insulation properties.

The third point. Decorative. The stone used for building finishes must be chosen in consideration of the harmony of its color and natural texture with the surrounding environment of the building, fully reflecting the artistic beauty of the building. At present, the natural rock veneer plates used in countries all over the world are generally based on a standard thickness of 20 mm. However, some countries in the West have produced some thicknesses of 12 mm to 15 because of the decorative effect of some buildings using stone. Millimeter of natural stone slabs. At the same time, in some countries and regions where the stone processing industry is developed, in order to adapt to the decorative effect of high-rise buildings, they pay great attention to the requirements of building materials standards. For this reason, ultra-thin finishes with a thickness of only 8 mm, 10 mm and 11 mm have been introduced. Slate, which is polished and polished to make the building finish look exceptionally beautiful, and saves a lot of raw materials.

The above contents are compiled according to the problems encountered by the students in the actual work, for reference, if there is any problem, please communicate and correct in time.

Remote control ceiling fan

smart ceiling fan,ceiling fan with remote,ceiling fan remote control,remote fan price

JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.windfansummer.com