Wall crack repairing method

Some friends have damaged the wall of the living room. Don't worry about it. Let's take a look at the cracking method of this wall . This is the first reason why the cracks need to be repaired. If the friends don't know, it doesn't matter. Our Xiaobian will tell you, there are some effective methods for repairing the wall cracks. We will also tell you about the small series, and our wall crack repair methods can be learned by friends.


墙面裂缝修补


First, the cause of wall crack repair


1. There is a crack in the insulation layer of the original room, which causes the wall to crack after renovation;


2. If the wall surface is grooved, the repairing is improperly applied, resulting in cracking of the wall surface;


3, the proportion of cement in the plastering is not accurate, the ratio is high, it is easy to crack;


4, the wall is greasy and scratched unevenly.


5, the ratio of latex paint and water is not suitable, these irregular operations will lead to cracking of the wall.


Reason summary


1. The causes of cracks in concrete walls are mainly the reasons for the concrete itself and the reasons for the construction process. Such cracks can be repaired by automatic low-pressure grouting. The automatic low-pressure grouting technology is a comprehensive technology for the concrete crack grouting field developed by the crack treatment center of Beijing Metallurgical Engineering, including materials, machinery and construction. After the grouting is repaired, the inside of the crack is filled with AB-1 grouting resin, and its tensile strength and bonding strength are high, and no cracking occurs again.


2. Cracks in brick masonry walls, cracks in new partition walls and cracks in walls of different materials are all temperature seams, which cannot be grouted and repaired. Because of the expansion and contraction of cracks, flexible materials should be used for repair (such as Beijing Metallurgical Construction). The A12 high-flexage joint material of the Engineering Crack Treatment Center) is an entirely new concept. Compared with the previous rigid repair, it is more suitable for crack treatment with a large amount of activity.


墙面裂缝修补


Second, the wall crack repair method


1. When you find cracks in the wall of your home, you should repair it in the first place. The first step is to first cut the cracked wall. We will first sprinkle water on the wall, wet the wall and clean it again, so that it will save more effort when we cut it. Everyone cut the wall to reveal the cement mortar wall or the putty level.


2. After you have removed the old wall skin, the next step is to apply the interface agent on the wall. Everyone must pay attention to evenly apply the upper interface agent. For cracks, special treatment should be carried out. You can use a kraft paper tape and white latex to cover the cracks to prevent cracking. In addition, everyone should also level the uneven wall surface, the general gypsum is more common, the unevenness of the bump is not more than 0.5 cm, and then the patch. “General non-load-bearing walls such as light-weight walls and thermal insulation walls need to be patched”


3. After all the above are handled, everyone must prepare to putty. The quality of the putty is related to the effect of the construction. You can use the putty with higher fineness and harder texture, or add a certain white latex to improve the hardness of the putty. After the putty is dry, everyone still needs to polish on the wall. After polishing, you must thoroughly clean the wall to avoid too much dust and affect the adhesion of the paint.


4, the last step is to paint on the wall, everyone can put a little more water when modulating the primer, so it is easier to brush evenly. Everyone should make sure that every part of the wall is brushed when painting, so as to ensure the effect of construction.


The above is the analysis of some reasons that can be used to make this wall crack repair. Friends, you will know that this wall needs to be noticed in order to reduce damage. Also, have you learned this crack repair method? There is a lot of decoration information on our decoration home network, so stay tuned.


More related wonderful reading:

Wall putty cracking repair method wall crack repairing matters needing attention


Strips/Corrugated Texture PU Sandwich Panels

Strips/Corrugated Texture PU Sandwich Panels

Rich selection of textures and colors meet different decoration requirements, giving the city and the buildings a new look.
The PU foam is the most advanced and eco-friendly insulation material in the world. With the help of the back aluminum foil, the thermal preservation effect achieves the best.
The unique structure prevents the heat loss in winter. Meanwhile it reduces the heat of the summer sunshine.
Aceta paintcoat and flurocarbon paint of weather resistance performance are applied on surface of wall panel. It is reserved with superior self-cleaning, weather resistance, corrosion resistance and acid& alkali resistance performance.
Light weight with 3.7Kgs/m2 makes the installation easy.
The installation process is clean and tidy without any noise and dust, construction waste.
Different selections of accessories meet different effects.
High quality and stable performance: Manufactured in CNC automation production line, the product pass rate can reach 99.9% with stable chemical structure and physical structure.

External Wall Panels,Insulated Outdoor Wall Panels,Strips Texture Pu Sandwich Panels,Corrugated Texture Pu Sandwich Panels

Jinan Zhengtang Insulation Decoration Material Co.Ltd , https://www.ztwallsiding.com