Analysis and suggestion of common problems in mosaic paving
With the flourishing development of the mosaic industry, more and more materials are being used, and the application environment is becoming wider and wider, which complicates the subsequent construction requirements of the mosaic. Jiuzheng Building Materials Network Xiaobian analyzes the common paving problems of mosaics as follows: 1. It is difficult to fill the mosaic with cement. The cement is thick paste and the mosaic is relatively thin. When the cement is applied to the wall, the cement will emerge through the mosaic gap, filling the gap between the mosaics, which will make the mosaic caulking more difficult. 2, the mosaic paving process is troublesome. The mosaic belongs to small-sized building materials. The product itself is relatively thin and difficult to construct. In addition, the separation of the bonding and caulking processes is naturally troublesome. 3, glass, gold and platinum mosaic with cement joints for a long time is not beautiful. 1) Glass mosaic is a weak acid product, which is in contact with cement for a long time, and the reaction is easy to damage the mosaic finish. 2) Gold-platinum mosaic contains resin components, which are easy to react with cement, which not only affects the appearance but also affects the life of the mosaic. Suggest: 1. The adhesive strength of the mosaic caulking adhesive is 2-3 times that of the cement. The thin layer can be used to stick the mosaic, and the bonding material will not fill the mosaic gap, so it will not interfere. The caulking process of the mosaic. 2. The mosaic joint adhesive is used to integrate the mosaic bonding and caulking process, and the operation can be completed in one operation. 3, mosaic caulking should use professional products. Glass mosaics can be used with general Boma gels; gold-platinum mosaics are recommended to be filled with epoxy sealants or products with a neutral pH. Aluminum Casting Motorcycle Parts Aluminum Casting Motorcycle Parts,Aluminum Motorcycle Parts,Motor Engine Parts,Motorcycle Spare Parts NINGBO AIKEHAN METAL PRODUCT CO.,LTD , http://www.diecastingsupplier.com