Analysis of market demand for biomass pellet fuel
In 2004, there were 25 provincial-level power grids in China that had power cuts. The maximum power gap in the winter and summer power peaks in China exceeded 30 million kilowatts. Many generator sets were shut down due to insufficient coal supply. In addition, there are still 30 million people in China who do not have access to electricity. The all-hydraulic crawler drill is a multi-purpose, internal combustion engine driven/electrically driven crawler-type full hydraulic drill that not only completes open-air blasting large-aperture drilling operations and ultra-deep hole drilling, but also achieves loose grit, alluvial, etc. The downhole impactor of the hole stratum is drilled with the pipe; it can be widely used in the anchoring hole, drainage hole, grouting hole construction of railway, highway, water conservancy, hydropower station landslide control project and dangerous rock anchoring project, and also used in blasting engineering. Construction of blastholes and tunnel pipe support holes. Crawler Drilling Rig,Mine Drilling Rig,Diamond Mine Drilling Rig,Mining Core Drilling Rig Jining Changsong Construction Machinery Co., Ltd. , https://www.jncsmachinery.com
In 2004, there were 25 provincial-level power grids in China that had power cuts. The maximum power gap in the winter and summer power peaks in China exceeded 30 million kilowatts. Many generator sets were shut down due to insufficient coal supply. In addition, there are still 30 million people in China who do not have access to electricity. The development of biomass-forming pellet fuel industry will provide necessary supplements to coal. The construction of distributed small and medium-sized thermal power plants will effectively alleviate the tension between power supply and heat supply, and will have far-reaching significance for China's comprehensive construction of a well-off society. Futong New Energy produces and sells straw pellet machine straw briquetting machine to suppress biomass pellet fuel.
With the acceleration of urbanization, urban residents are close to 600 million people, causing the pressure on urban heating in China to gradually increase. Many of the newly built communities are mostly outside the city, and the heat pipe network is difficult to reach, or the heat loss is serious and difficult to sustain. In order to meet the living needs of residents, it is necessary to adopt district heating measures, which are subject to environmental protection restrictions. Most of them are heated by natural gas or electric fuel, and the heating efficiency is low. Either the heating cost is too high, or the heating plant is operating at a loss, neither of which is a long-term solution. After the introduction of China's "Renewable Energy Law", straw power generation has a legal guarantee. The development of straw pellet fuel cogeneration can meet the heating demand and generate electricity income, and the heating distance is short, and the construction investment is small. It is a win-win development and utilization of renewable energy solutions.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
The drilling rig is composed of a main machine, a hydraulic station, a console, a crawler walking device and an air compressor; the hydraulic hoses of the main machine, the hydraulic station and the operating table are connected to each other as a whole.
The power head consists of low-speed high-torque hydraulic motor, power head frame, main shaft, gear, faucet, drill pipe, and unloader.
The power head is driven by a hydraulic motor and transmitted directly to the main shaft through a gear to perform a rotary motion, thereby driving the drill pipe and the impactor to rotate. In the middle of the main shaft, a side of the power head has an outer wire joint for connecting the high-pressure hose, and an air outlet pipe of the operation table. Connected, the compressed air enters the inner hole of the main shaft through the wind faucet, and is sent to the bottom of the hole to drive the impactor through the drill pipe, and carries the cuttings formed outside the hole.
The rig structure is monolithic with a track walking chassis and a grip shackle. The crawler chassis moves quickly and the hole position is convenient; the clamping shackle can automatically remove the drill pipe and the casing, which reduces the labor intensity of the workers and improves the construction efficiency.