Apply anti-rust oil to avoid rusting of SKF imported bearings
Stamping Parts,Metal Stamping Part,Local Steel Metal Stamping,Plate Parts JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.tongdetrade.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge> Apply anti-rust oil to avoid rusting of SKF bearings Apply anti-rust oil to avoid rusting of SKF imported bearings
Ways to avoid rusting of SKF bearings: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. Immersion method: Some small imported bearings are selected to be immersed in anti-rust grease; the thickness of the oil film can be reached by controlling the temperature or viscosity of the anti-rust grease. The appearance of the surface is adhered to a layer of anti-rust grease.
2, brushing method: brushing when paying attention to uniform coating on the appearance of imported bearings; do not pile up; also pay attention to avoid leakage coating.
3. Spray method: Some large-scale anti-rust materials are not suitable for oiling by immersion method; usually, the compressed air with a pressure of about 0.77MPa is sprayed in the air. The spray method is suitable for solvent-diluted rust-proof oil or thin layer rust-proof. Oil. It is necessary to choose a perfect fire prevention and labor protection method for this method. Pre-disposal method for rusting of SKF bearing surface:
1. Appearance hygiene: It is necessary to remove the nature of the imported bearing appearance and the conditions at the time. Commonly used methods are solvent removal method, mechanical hygiene method and chemical treatment hygiene method.
2, the appearance of boring clear and clean, can be dried with filtered dry compressed air. Perhaps with a driers at 120 ~ 170 ° C temperature boring; finally with a clean gauze dry.
Recommend to friends comments close window Bearing related knowledge The application of the bearing steel ring is the application of the nylon cage bearing. The description of the rolling bearing industry specification catalog rolling bearing damage causes the analysis of several key skills in bearing production.
This article links to http://
Please indicate China Bearing Network http://
Previous: Linear Bearings LM and LME Codes Fundamental Next: Bearing Packaging Guidelines and General Needs